From 77c4d6e67debf0e729734d882df033c4c0f5b0c3 Mon Sep 17 00:00:00 2001
From: "Suren A. Chilingaryan" <csa@suren.me>
Date: Mon, 20 Apr 2015 22:01:04 +0200
Subject: Big redign of model structures

---
 tests/ipecamera/bench.sh                           |  34 ---
 tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh    | 326 ---------------------
 .../ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh  | 325 --------------------
 tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh    | 318 --------------------
 tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh    | 323 --------------------
 tests/ipecamera/debug/incomplete.sh                |  37 ---
 tests/ipecamera/frame.sh                           |  36 ---
 tests/ipecamera/frame_req.sh                       |  27 --
 tests/ipecamera/grab-hwtrigger.sh                  |  20 --
 tests/ipecamera/stimuli.sh                         |  30 --
 tests/ipecamera/tests/loopback-test.sh             |  87 ------
 tests/ipecamera/tests/run-and-decode-test.sh       | 103 -------
 12 files changed, 1666 deletions(-)
 delete mode 100755 tests/ipecamera/bench.sh
 delete mode 100755 tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
 delete mode 100755 tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
 delete mode 100755 tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
 delete mode 100755 tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
 delete mode 100755 tests/ipecamera/debug/incomplete.sh
 delete mode 100755 tests/ipecamera/frame.sh
 delete mode 100755 tests/ipecamera/frame_req.sh
 delete mode 100755 tests/ipecamera/grab-hwtrigger.sh
 delete mode 100755 tests/ipecamera/stimuli.sh
 delete mode 100755 tests/ipecamera/tests/loopback-test.sh
 delete mode 100755 tests/ipecamera/tests/run-and-decode-test.sh

(limited to 'tests/ipecamera')

diff --git a/tests/ipecamera/bench.sh b/tests/ipecamera/bench.sh
deleted file mode 100755
index 09edae9..0000000
--- a/tests/ipecamera/bench.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-size=16
-bytes=`expr $size "*" 4`
-
-rm -f bench.out 
-pci --stop-dma dma1
-pci --reset
-
-#pci -w xrawdata_packet_length $bytes
-
-pci --start-dma dma1
-pci -w control 0x1e5
-sleep 1
-pci -w control 0x1e1
-
-sleep 1
-pci -w control 0x3e1
-for i in `seq 1 10`; do
-#    pci -w control 0x1e1
-    pci -w dma1 -s $size "*$i"
-#    pci -w control 0x3e1
-    usleep 100000
-    pci -r dma1 -s $size -o bench.out
-done
-
-pci -w control 0x1e1
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
deleted file mode 100755
index f4afa06..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
+++ /dev/null
@@ -1,326 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204 
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error=1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800 
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    echo "  $status     "
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the reset and initialization"
-else
-	echo " Camera READY ........................... OK"		
-fi
-echo 
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
deleted file mode 100755
index 5a4e582..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
+++ /dev/null
@@ -1,325 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204 
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error=1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 2047
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800 
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error=1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the reset and initialization"
-else
-	echo " Camera READY ........................... OK"		
-fi
-echo 
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
deleted file mode 100755
index 3c4af0e..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
+++ /dev/null
@@ -1,318 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4 
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 11 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 11 bit mode, set ADC resolution 11 bits "
-val=f001 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error =1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab02
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.01
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    error =1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the resetand initialization"
-else
-	echo " Camera READY ........ OK"		
-fi
-echo 
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
deleted file mode 100755
index b04f2cd..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4 
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10 
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1		
-    # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301 
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 12 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 12 bit mode, set ADC resolution 12 bits "
-val=f002 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
-    error =1
-    # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa0f
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
-    echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
-    error =1
-    # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-
-#pci -w 0x9000 0xd011
-sleep 0.01
-pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-sleep 0.01
-pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "844950280f0010013ffff111" ]; then
-
-    echo "--------------------------------->>>> ERROR! in the camera status ... "
-    echo $status
-    error=1
-    # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
-	echo " Error in the resetand initialization"
-else
-	echo " Camera READY ........ OK"		
-fi
-echo 
-
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
diff --git a/tests/ipecamera/debug/incomplete.sh b/tests/ipecamera/debug/incomplete.sh
deleted file mode 100755
index 5c80198..0000000
--- a/tests/ipecamera/debug/incomplete.sh
+++ /dev/null
@@ -1,37 +0,0 @@
-#! /bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f images.raw
-touch images.raw
-
-echo "Starting the grabber"
-pci --stop-dma
-pci --start-dma dma1
-pci -g -o images.raw --run-time 1000000000 &
-pid=$!
-
-usleep 1000000
-
-for i in `seq 1 100000`; do
-    old_size=`ls -la images.raw | cut -d " " -f 5`
-    echo "Trigger $i"
-    pci --trigger
-    usleep 100000
-    new_size=`ls -la images.raw | cut -d " " -f 5`
-    if [ $old_size -eq $new_size ]; then
-	sleep 2
-	new_size=`ls -la images.raw | cut -d " " -f 5`
-	if [ $old_size -eq $new_size ]; then
-	    echo "Incomplete frame..."
-	    killall -SIGINT pci
-	    break
-	fi
-    fi
-done
-
-echo "Waiting grabber to finish"
-wait $pid
diff --git a/tests/ipecamera/frame.sh b/tests/ipecamera/frame.sh
deleted file mode 100755
index 679817b..0000000
--- a/tests/ipecamera/frame.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout ... "
-pci -w control 3e1
-
-usleep 100000
-
-pci -r dma1 -o bench.out --multipacket
-
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/frame_req.sh b/tests/ipecamera/frame_req.sh
deleted file mode 100755
index bce89c3..0000000
--- a/tests/ipecamera/frame_req.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-#pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout 3... "
-pci -w control 3e1
-usleep 1000000
-pci -w control 1e1
-
diff --git a/tests/ipecamera/grab-hwtrigger.sh b/tests/ipecamera/grab-hwtrigger.sh
deleted file mode 100755
index 0279ab4..0000000
--- a/tests/ipecamera/grab-hwtrigger.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#! /bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function enable_hw_trigger {
-    usleep 100000
-    pci -w control 0xa01
-}
-
-rm -f images.raw
-
-enable_hw_trigger &
-pid=$!
-
-echo "Starting the grabber"
-pci -g -o images.raw --run-time 60000000 --verbose 10 -o /dev/null
-wait $pid
diff --git a/tests/ipecamera/stimuli.sh b/tests/ipecamera/stimuli.sh
deleted file mode 100755
index 33e99e1..0000000
--- a/tests/ipecamera/stimuli.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function pci {
-    PCILIB_PATH="/root/pcitool"
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f bench.out
-
-echo "Set FFFF the frame space .."
-pci -w 0x9180 fff 
-
-echo "Set the number of frames .."
-pci -w reg9170 55
-
-pci --start-dma dma1
-
-echo "Send frame request ... "
-pci -w control 1f1
-usleep 100000
-pci -w control 1e1
-
-
-echo "Enable Readout ... "
-pci -w control 3e1
-pci -r dma1 -o bench.out --multipacket
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/tests/loopback-test.sh b/tests/ipecamera/tests/loopback-test.sh
deleted file mode 100755
index 1c033cc..0000000
--- a/tests/ipecamera/tests/loopback-test.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /bin/bash
-
-TESTS_PATH="`dirname \"$0\"`" 
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function compare {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/compare_to_value $*
-}
-
-#size=`expr 1024 "*" 1024`
-size=`expr 1024 "*" 1`
-multiplier=2
-wait=0
-
-/root/pcitool/tests/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma dma1
-pci --start-dma dma1
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1024 -o /dev/null | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
-    echo "There is data on dma..."
-    exit
-fi
-
-failed=0
-send=0
-errors=0
-err_num=0
-
-print_iters=`expr 2 + 1024 '*' 100 / $size`
-
-read_size=`expr $multiplier '*' $size`
-echo "Starting..."
-i=1
-
-pci -w 0x9040 0x201
-
-while [ 1 ]; do
-    if [ $wait -gt 0 ]; then
-	pci -w 0x9040 0x1
-    fi
-    
-    pci -w dma1 -s $size "*0x$i"
-    rm -f /tmp/camera-test.out
-    pci -r dma1 --wait --multipacket -s $read_size -o /tmp/camera-test.out -t 1000000 &> /dev/null
-    if [ $wait -gt 0 ]; then
-	wrdone=0
-	while [ $wrdone -eq 0 ]; do
-#	    pci --list-dma-engines
-	    pci --list-dma-engines | grep "DMA1 S2C" | grep "SD" #&> /dev/null
-	    wrdone=$?
-	done
-	pci -w 0x9040 0x201
-    fi
-
-    res=`compare /tmp/camera-test.out  $read_size "$i" 6 2 6`
-    if [ $? -eq 0 ]; then
-	err_cnt=`echo $res | cut -f 1 -d ' '`
-	if [ "$err_cnt" -ne 0 ]; then
-	    pci -r dma1 --wait --multipacket -o /tmp/camera-test.out -t 1000000 &> /dev/null
-	    cp /tmp/camera-test.out /tmp/camera-test.out.$err_num
-	    err_num=$(($err_num + 1))
-	fi
-	byte_cnt=`echo $res | cut -f 3 -d ' '`
-	send=$(($send + $byte_cnt * 4))
-	errors=$(($errors + $err_cnt * 4))
-    else 
-	failed=$(($failed + 1))
-    fi
-    
-    i=$((i + 1))
-    if [ $i -eq $print_iters ]; then
-	echo "Data send: $send bytes, Errors: $errors bytes, Failed exchanges: $failed"
-#	pci -r 0x9070 -s 4	
-	i=1
-    fi
-done
diff --git a/tests/ipecamera/tests/run-and-decode-test.sh b/tests/ipecamera/tests/run-and-decode-test.sh
deleted file mode 100755
index d355475..0000000
--- a/tests/ipecamera/tests/run-and-decode-test.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-#! /bin/bash
-
-location=/mnt/fast/
-#location="./"
-duration=10000000
-wait_frame=1000000
-
-TESTS_PATH="`dirname \"$0\"`" 
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
-    PCILIB_PATH=$TESTS_PATH/..
-    LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function stop {
-    usleep $duration
-    pci -w control 0x201 &> /dev/null
-}
-
-function reset {
-    pci -r 0x9000 -s 256 > $1.status
-    $TESTS_PATH/ipecamera/Reset_Init_all_reg_10bit.sh &> $1.reset 
-}
-
-
-$TESTS_PATH/ipecamera/cfg/Reset_Init_all_reg_10bit.sh &> /dev/null
-$TESTS_PATH/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma
-pci --start-dma dma1
-
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1 | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
-    echo "There is data on dma..."
-    exit
-fi
-
-echo "Starting ... "
-
-decode_failures=0
-failures=0
-failed=0
-frames=0
-fpga_failures=0
-cmosis_failures=0
-frame_rate_failures=0
-
-iter=0
-while [ 1 ]; do
-    pci -w control 0xa01 &> /dev/null
-    stop &
-
-    output="$location/test$iter.out"
-    rm -f $output
-    pci -r dma1 -o $output  --wait --multipacket -t $wait_frame &> /dev/null
-
-    killall -9 usleep &> /dev/null
-    usleep 100000
-    pci -w control 0x201 &> /dev/null
-    
-    if [ -f $output ]; then
-	result=`ipedec -d -v --continue $output 2>&1 | grep -iE "failed|decoded"`
-	cur_failed=`echo $result | wc -l`
-	cur_decoded=`echo $result | tail -n 1 | grep -i decoded`
-	if [ $? -ne 0 -o $cur_failed -eq 0 ]; then
-	    ipedec -d -v --continue $output > $output.decode
-	    decode_failures=$(($decode_failures + 1))
-	    reset $output
-	else
-	    cur_failed=$(($cur_failed - 1))
-	    cur_frames=`echo $cur_decoded | cut -f 2 -d ' '`
-	    failed=$(($failed + $cur_failed))
-	    frames=$(($frames + $cur_frames))
-	    fpga_status=`pci -r 0x9054 | awk '{print $2;}' | cut -c 2`
-	    cmosis_status=`pci -r 0x9050 | awk '{print $2;}' | cut -c 3-4`
-	    if [ "$fpga_status" != "f" ]; then
-		fpga_failures=$(($fpga_failures + 1))
-		reset $output
-	    elif [ "$cmosis_status" == "7d" ]; then
-		cmosis_failures=$(($cmosis_failures + 1))
-		reset $output
-	    elif [ $cur_frames -lt 10 ]; then
-		frame_rate_failures=$(($frame_rate_failures + 1))
-		reset $output
-	    elif [ $cur_failed -eq 0 ]; then
-		rm -f $output
-	    else
-		reset $output
-	    fi
-	fi
-    else
-	failures=$(($failures + 1))
-	reset $output
-    fi
-
-    echo "Frames: $frames, Failed Frames: $failed, Failed Exchanges: $failures, Failed Decodings: $decode_failures, FPGA Failures: $fpga_failures, CMOSIS Failures: $cmosis_failures, Low Frame Rate: $frame_rate_failures"
-    iter=`expr $iter + 1`
-done
-- 
cgit v1.2.3