Merge pull request #181 from kwoodson/git_hooks

Adding git hooks for jenkins repository validation.

4 files changed, 519 insertions, 0 deletions

diff --git a/git/.pylintrc b/git/.pylintrc
new file mode 100644
index 000000000..2d45f867e
--- /dev/null
+++ b/git/.pylintrc
@@ -0,0 +1,390 @@
+[MASTER]
+
+# Specify a configuration file.
+#rcfile=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Profiled execution.
+profile=no
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS
+
+# Pickle collected data for later comparisons.
+persistent=no
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Deprecated. It was used to include message's id in output. Use --msg-template
+# instead.
+#include-ids=no
+
+# Deprecated. It was used to include symbolic ids of messages in output. Use
+# --msg-template instead.
+#symbols=no
+
+# Use multiple processes to speed up Pylint.
+jobs=1
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code
+extension-pkg-whitelist=
+
+# Allow optimization of some AST trees. This will activate a peephole AST
+# optimizer, which will apply various small optimizations. For instance, it can
+# be used to obtain the result of joining multiple strings with the addition
+# operator. Joining a lot of strings can lead to a maximum recursion error in
+# Pylint and this flag can prevent that. It has one side effect, the resulting
+# AST will be different than the one from reality.
+optimize-ast=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED
+confidence=
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time. See also the "--disable" option for examples.
+#enable=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once).You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use"--disable=all --enable=classes
+# --disable=W"
+disable=E1608,W1627,E1601,E1603,E1602,E1605,E1604,E1607,E1606,W1621,W1620,W1623,W1622,W1625,W1624,W1609,W1608,W1607,W1606,W1605,W1604,W1603,W1602,W1601,W1639,W1640,I0021,W1638,I0020,W1618,W1619,W1630,W1626,W1637,W1634,W1635,W1610,W1611,W1612,W1613,W1614,W1615,W1616,W1617,W1632,W1633,W0704,W1628,W1629,W1636
+
+
+[REPORTS]
+
+# Set the output format. Available formats are text, parseable, colorized, msvs
+# (visual studio) and html. You can also give a reporter class, eg
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Put messages in a separate file for each module / package specified on the
+# command line instead of printing them on stdout. Reports (if any) will be
+# written in a file name "pylint_global.[txt|html]".
+files-output=no
+
+# Tells whether to display a full report or only the messages
+reports=no
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# Add a comment according to your evaluation note. This is used by the global
+# evaluation report (RP0004).
+comment=no
+
+# Template used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details
+#msg-template=
+
+
+[LOGGING]
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format
+logging-modules=logging
+
+
+[BASIC]
+
+# Required attributes for module, separated by a comma
+required-attributes=
+
+# List of builtins function names that should not be used, separated by a comma
+bad-functions=map,filter,input
+
+# Good variable names which should always be accepted, separated by a comma
+good-names=i,j,k,ex,Run,_
+
+# Bad variable names which should always be refused, separated by a comma
+bad-names=foo,bar,baz,toto,tutu,tata
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Include a hint for the correct naming format with invalid-name
+include-naming-hint=no
+
+# Regular expression matching correct function names
+function-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for function names
+function-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct variable names
+variable-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for variable names
+variable-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct constant names
+const-rgx=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Naming hint for constant names
+const-name-hint=(([A-Z_][A-Z0-9_]*)|(__.*__))$
+
+# Regular expression matching correct attribute names
+attr-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for attribute names
+attr-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct argument names
+argument-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for argument names
+argument-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression matching correct class attribute names
+class-attribute-rgx=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Naming hint for class attribute names
+class-attribute-name-hint=([A-Za-z_][A-Za-z0-9_]{2,30}|(__.*__))$
+
+# Regular expression matching correct inline iteration names
+inlinevar-rgx=[A-Za-z_][A-Za-z0-9_]*$
+
+# Naming hint for inline iteration names
+inlinevar-name-hint=[A-Za-z_][A-Za-z0-9_]*$
+
+# Regular expression matching correct class names
+class-rgx=[A-Z_][a-zA-Z0-9]+$
+
+# Naming hint for class names
+class-name-hint=[A-Z_][a-zA-Z0-9]+$
+
+# Regular expression matching correct module names
+module-rgx=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Naming hint for module names
+module-name-hint=(([a-z_][a-z0-9_]*)|([A-Z][a-zA-Z0-9]+))$
+
+# Regular expression matching correct method names
+method-rgx=[a-z_][a-z0-9_]{2,30}$
+
+# Naming hint for method names
+method-name-hint=[a-z_][a-z0-9_]{2,30}$
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=__.*__
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+
+[SIMILARITIES]
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+
+[VARIABLES]
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# A regular expression matching the name of dummy variables (i.e. expectedly
+# not used).
+dummy-variables-rgx=_$|dummy
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid to define new builtins when possible.
+additional-builtins=
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,_cb
+
+
+[TYPECHECK]
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis
+ignored-modules=
+
+# List of classes names for which member attributes should not be checked
+# (useful for classes with attributes dynamically set).
+ignored-classes=SQLObject
+
+# When zope mode is activated, add a predefined set of Zope acquired attributes
+# to generated-members.
+zope=no
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E0201 when accessed. Python regular
+# expressions are accepted.
+generated-members=REQUEST,acl_users,aq_parent
+
+
+[SPELLING]
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package.
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,XXX,TODO
+
+
+[FORMAT]
+
+# Maximum number of characters on a single line.
+max-line-length=100
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+# List of optional constructs for which whitespace checking is disabled
+no-space-check=trailing-comma,dict-separator
+
+# Maximum number of lines in a module
+max-module-lines=1000
+
+# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
+# tab).
+indent-string='    '
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=4
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method
+max-args=5
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore
+ignored-argument-names=_.*
+
+# Maximum number of locals for function / method body
+max-locals=15
+
+# Maximum number of return / yield for function / method body
+max-returns=6
+
+# Maximum number of branch for function / method body
+max-branches=12
+
+# Maximum number of statements in function / method body
+max-statements=50
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+
+[CLASSES]
+
+# List of interface methods to ignore, separated by a comma. This is used for
+# instance to not check methods defines in Zope's Interface base class.
+ignore-iface-methods=isImplementedBy,deferred,extends,names,namesAndDescriptions,queryDescriptionFor,getBases,getDescriptionFor,getDoc,getName,getTaggedValue,getTaggedValueTags,isEqualOrExtendedBy,setTaggedValue,isImplementedByInstancesOf,adaptWith,is_implemented_by
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,__new__,setUp
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=mcs
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,_fields,_replace,_source,_make
+
+
+[IMPORTS]
+
+# Deprecated modules which should not be used, separated by a comma
+deprecated-modules=regsub,TERMIOS,Bastion,rexec
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled)
+import-graph=
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled)
+ext-import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled)
+int-import-graph=
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "Exception"
+overgeneral-exceptions=Exception
diff --git a/git/parent.rb b/git/parent.rb
new file mode 100755
index 000000000..2acb127c4
--- /dev/null
+++ b/git/parent.rb
@@ -0,0 +1,45 @@
+#!/usr/bin/env ruby
+#
+#
+#
+
+if __FILE__ == $0
+  # If we aren't on master we don't need to parent check
+  branch = 'prod'
+  exit(0) if ARGV[0] !~ /#{branch}/
+  commit_id = ARGV[1]
+  %x[/usr/bin/git checkout #{branch}]
+  %x[/usr/bin/git merge #{commit_id}]
+
+  count = 0
+  #lines = %x[/usr/bin/git rev-list --left-right stg...master].split("\n")
+  lines = %x[/usr/bin/git rev-list --left-right remotes/origin/stg...#{branch}].split("\n")
+  lines.each do |commit|
+    # next if they are in stage
+    next if commit =~ /^</
+    # remove the first char '>'
+    commit = commit[1..-1]
+    # check if any remote branches contain $commit
+    results = %x[/usr/bin/git branch -q -r --contains #{commit} 2>/dev/null ]
+    # if this comes back empty, nothing contains it, we can skip it as
+    # we have probably created the merge commit here locally
+    next if results.empty?
+
+    # The results generally contain origin/pr/246/merge and origin/pr/246/head
+    # this is the pull request which would contain the commit in question.
+    #
+    # If the results do not contain origin/stg then stage does not contain
+    # the commit in question.  Therefore we need to alert!
+    unless results =~ /origin\/stg/
+      puts "\nFAILED: (These commits are not in stage.)\n"
+      puts "\t#{commit}"
+      count += 1
+    end
+  end
+
+  # Exit with count of commits in #{branch} but not stg
+  exit(count)
+end
+
+__END__
+
diff --git a/git/pylint.sh b/git/pylint.sh
new file mode 100755
index 000000000..73d08e00c
--- /dev/null
+++ b/git/pylint.sh
@@ -0,0 +1,12 @@
+#!/usr/bin/env bash
+
+
+OLDREV=$1
+NEWREV=$2
+TRG_BRANCH=$3
+
+/usr/bin/git diff --name-only $OLDREV $NEWREV --diff-filter=ACM | \
+ grep ".py$" | \
+ xargs -r -I{} /usr/bin/python -m pylint --rcfile ${WORKSPACE}/git/.pylintrc  {}
+
+exit $?
diff --git a/git/yaml_validation.rb b/git/yaml_validation.rb
new file mode 100755
index 000000000..f5ded7a78
--- /dev/null
+++ b/git/yaml_validation.rb
@@ -0,0 +1,72 @@
+#!/usr/bin/env ruby
+#
+#
+#
+require 'yaml'
+require 'tmpdir'
+
+class YamlValidate
+  def self.yaml_file?(filename)
+    return filename.end_with?('.yaml') || filename.end_with?('.yml')
+  end
+
+  def self.short_yaml_ext?(filename)
+    return filename.end_with?(".yml")
+  end
+
+  def self.valid_yaml?(filename)
+    YAML::load_file(filename)
+
+    return true
+  end
+end
+
+class GitCommit
+  attr_accessor :oldrev, :newrev, :refname, :tmp
+  def initialize(oldrev, newrev, refname)
+    @oldrev = oldrev
+    @newrev = newrev
+    @refname = refname
+    @tmp = Dir.mktmpdir(@newrev)
+  end
+
+  def get_file_changes()
+    files = %x[/usr/bin/git diff --name-only #{@oldrev} #{@newrev} --diff-filter=ACM].split("\n")
+
+    # if files is empty we will get a full checkout.  This happens on
+    # a git rm file.  If there are no changes then we need to skip the archive
+    return [] if files.empty?
+
+    # We only want to take the files that changed.  Archive will do that when passed
+    # the filenames.  It will export these to a tmp dir
+    system("/usr/bin/git archive #{@newrev} #{files.join(" ")} | tar x -C #{@tmp}")
+    return Dir.glob("#{@tmp}/**/*").delete_if { |file| File.directory?(file) }
+  end
+end
+
+if __FILE__ == $0
+  while data = STDIN.gets
+    oldrev, newrev, refname = data.split
+    gc = GitCommit.new(oldrev, newrev, refname)
+
+    results = []
+    gc.get_file_changes().each do |file|
+      begin
+        puts "++++++ Received:  #{file}"
+
+        #raise "Yaml file extensions must be .yaml not .yml" if YamlValidate.short_yaml_ext? file
+
+        # skip readme, other files, etc
+        next unless YamlValidate.yaml_file?(file)
+
+        results << YamlValidate.valid_yaml?(file)
+      rescue Exception => ex
+        puts "\n#{ex.message}\n\n"
+        results << false
+      end
+    end
+
+    #puts "RESULTS\n#{results.inspect}\n"
+    exit 1 if results.include?(false)
+  end
+end