diff options
Diffstat (limited to 'inventory/byo/hosts.ose.example')
| -rw-r--r-- | inventory/byo/hosts.ose.example | 960 |
1 files changed, 0 insertions, 960 deletions
diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example deleted file mode 100644 index 363cfd2a7..000000000 --- a/inventory/byo/hosts.ose.example +++ /dev/null @@ -1,960 +0,0 @@ -# This is an example of a bring your own (byo) host inventory - -# Create an OSEv3 group that contains the masters and nodes groups -[OSEv3:children] -masters -nodes -etcd -lb -nfs - -# Set variables common for all OSEv3 hosts -[OSEv3:vars] -# Enable unsupported configurations, things that will yield a partially -# functioning cluster but would not be supported for production use -#openshift_enable_unsupported_configurations=false - -# SSH user, this user should allow ssh based auth without requiring a -# password. If using ssh key based auth, then the key should be managed by an -# ssh agent. -ansible_ssh_user=root - -# If ansible_ssh_user is not root, ansible_become must be set to true and the -# user must be configured for passwordless sudo -#ansible_become=yes - -# Debug level for all OpenShift components (Defaults to 2) -debug_level=2 - -# Specify the deployment type. Valid values are origin and openshift-enterprise. -openshift_deployment_type=openshift-enterprise - -# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we -# rely on the version running on the first master. Works best for containerized installs where we can usually -# use this to lookup the latest exact version of the container images, which is the tag actually used to configure -# the cluster. For RPM installations we just verify the version detected in your configured repos matches this -# release. -openshift_release=v3.7 - -# Specify an exact container image tag to install or configure. -# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. -# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_image_tag=v3.7.0 - -# Specify an exact rpm version to install or configure. -# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. -# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_pkg_version=-3.7.0 - -# This enables all the system containers except for docker: -#openshift_use_system_containers=False -# -# But you can choose separately each component that must be a -# system container: -# -#openshift_use_openvswitch_system_container=False -#openshift_use_node_system_container=False -#openshift_use_master_system_container=False -#openshift_use_etcd_system_container=False -# -# In either case, system_images_registry must be specified to be able to find the system images -#system_images_registry="registry.access.redhat.com" - -# Manage openshift example imagestreams and templates during install and upgrade -#openshift_install_examples=true - -# Configure logoutURL in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url -#openshift_master_logout_url=http://example.com - -# Configure extensionScripts in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets -#openshift_master_extension_scripts=['/path/to/script1.js','/path/to/script2.js'] - -# Configure extensionStylesheets in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets -#openshift_master_extension_stylesheets=['/path/to/stylesheet1.css','/path/to/stylesheet2.css'] - -# Configure extensions in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files -#openshift_master_extensions=[{'name': 'images', 'sourceDirectory': '/path/to/my_images'}] - -# Configure extensions in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files -#openshift_master_oauth_template=/path/to/login-template.html - -# Configure imagePolicyConfig in the master config -# See: https://godoc.org/github.com/openshift/origin/pkg/cmd/server/api#ImagePolicyConfig -#openshift_master_image_policy_config={"maxImagesBulkImportedPerRepository": 3, "disableScheduledImport": true} - -# Configure master API rate limits for external clients -#openshift_master_external_ratelimit_qps=200 -#openshift_master_external_ratelimit_burst=400 -# Configure master API rate limits for loopback clients -#openshift_master_loopback_ratelimit_qps=300 -#openshift_master_loopback_ratelimit_burst=600 - -# Docker Configuration -# Add additional, insecure, and blocked registries to global docker configuration -# For enterprise deployment types we ensure that registry.access.redhat.com is -# included if you do not include it -#openshift_docker_additional_registries=registry.example.com -#openshift_docker_insecure_registries=registry.example.com -#openshift_docker_blocked_registries=registry.hacker.com -# Disable pushing to dockerhub -#openshift_docker_disable_push_dockerhub=True -# Use Docker inside a System Container. Note that this is a tech preview and should -# not be used to upgrade! -# The following options for docker are ignored: -# - docker_version -# - docker_upgrade -# The following options must not be used -# - openshift_docker_options -#openshift_docker_use_system_container=False -# Install and run cri-o along side docker -# NOTE: This uses openshift_docker_systemcontainer_image_registry_override as it's override -# just as container-engine does. -#openshift_use_crio=False -# Force the registry to use for the container-engine/crio system container. By default the registry -# will be built off of the deployment type and ansible_distribution. Only -# use this option if you are sure you know what you are doing! -#openshift_docker_systemcontainer_image_override="registry.example.com/container-engine:latest" -#openshift_crio_systemcontainer_image_override="registry.example.com/cri-o:latest" -# Items added, as is, to end of /etc/sysconfig/docker OPTIONS -# Default value: "--log-driver=journald" -#openshift_docker_options="-l warn --ipv6=false" - -# Specify whether to run Docker daemon with SELinux enabled in containers. Default is True. -# Uncomment below to disable; for example if your kernel does not support the -# Docker overlay/overlay2 storage drivers with SELinux enabled. -#openshift_docker_selinux_enabled=False - -# Specify exact version of Docker to configure or upgrade to. -# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. -# docker_version="1.12.1" - -# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. -# docker_upgrade=False - -# Specify exact version of etcd to configure or upgrade to. -# etcd_version="3.1.0" -# Enable etcd debug logging, defaults to false -# etcd_debug=true -# Set etcd log levels by package -# etcd_log_package_levels="etcdserver=WARNING,security=DEBUG" - -# Upgrade Hooks -# -# Hooks are available to run custom tasks at various points during a cluster -# upgrade. Each hook should point to a file with Ansible tasks defined. Suggest using -# absolute paths, if not the path will be treated as relative to the file where the -# hook is actually used. -# -# Tasks to run before each master is upgraded. -# openshift_master_upgrade_pre_hook=/usr/share/custom/pre_master.yml -# -# Tasks to run to upgrade the master. These tasks run after the main openshift-ansible -# upgrade steps, but before we restart system/services. -# openshift_master_upgrade_hook=/usr/share/custom/master.yml -# -# Tasks to run after each master is upgraded and system/services have been restarted. -# openshift_master_upgrade_post_hook=/usr/share/custom/post_master.yml - -# Alternate image format string, useful if you've got your own registry mirror -# Configure this setting just on node or master -#oreg_url_master=example.com/openshift3/ose-${component}:${version} -#oreg_url_node=example.com/openshift3/ose-${component}:${version} -# For setting the configuration globally -#oreg_url=example.com/openshift3/ose-${component}:${version} -# If oreg_url points to a registry other than registry.access.redhat.com we can -# modify image streams to point at that registry by setting the following to true -#openshift_examples_modify_imagestreams=true - -# If oreg_url points to a registry requiring authentication, provide the following: -#oreg_auth_user=some_user -#oreg_auth_password='my-pass' -# NOTE: oreg_url must be defined by the user for oreg_auth_* to have any affect. -# oreg_auth_pass should be generated from running docker login. -# To update registry auth credentials, uncomment the following: -#oreg_auth_credentials_replace: True - -# OpenShift repository configuration -#openshift_additional_repos=[{'id': 'ose-devel', 'name': 'ose-devel', 'baseurl': 'http://example.com/puddle/build/AtomicOpenShift/3.1/latest/RH7-RHOSE-3.0/$basearch/os', 'enabled': 1, 'gpgcheck': 0}] -#openshift_repos_enable_testing=false - -# htpasswd auth -openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] -# Defining htpasswd users -#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'} -# or -#openshift_master_htpasswd_file=<path to local pre-generated htpasswd file> - -# Allow all auth -#openshift_master_identity_providers=[{'name': 'allow_all', 'login': 'true', 'challenge': 'true', 'kind': 'AllowAllPasswordIdentityProvider'}] - -# LDAP auth -#openshift_master_identity_providers=[{'name': 'my_ldap_provider', 'challenge': 'true', 'login': 'true', 'kind': 'LDAPPasswordIdentityProvider', 'attributes': {'id': ['dn'], 'email': ['mail'], 'name': ['cn'], 'preferredUsername': ['uid']}, 'bindDN': '', 'bindPassword': '', 'ca': 'my-ldap-ca.crt', 'insecure': 'false', 'url': 'ldap://ldap.example.com:389/ou=users,dc=example,dc=com?uid'}] -# -# Configure LDAP CA certificate -# Specify either the ASCII contents of the certificate or the path to -# the local file that will be copied to the remote host. CA -# certificate contents will be copied to master systems and saved -# within /etc/origin/master/ with a filename matching the "ca" key set -# within the LDAPPasswordIdentityProvider. -# -#openshift_master_ldap_ca=<ca text> -# or -#openshift_master_ldap_ca_file=<path to local ca file to use> - -# OpenID auth -#openshift_master_identity_providers=[{"name": "openid_auth", "login": "true", "challenge": "false", "kind": "OpenIDIdentityProvider", "client_id": "my_client_id", "client_secret": "my_client_secret", "claims": {"id": ["sub"], "preferredUsername": ["preferred_username"], "name": ["name"], "email": ["email"]}, "urls": {"authorize": "https://myidp.example.com/oauth2/authorize", "token": "https://myidp.example.com/oauth2/token"}, "ca": "my-openid-ca-bundle.crt"}] -# -# Configure OpenID CA certificate -# Specify either the ASCII contents of the certificate or the path to -# the local file that will be copied to the remote host. CA -# certificate contents will be copied to master systems and saved -# within /etc/origin/master/ with a filename matching the "ca" key set -# within the OpenIDIdentityProvider. -# -#openshift_master_openid_ca=<ca text> -# or -#openshift_master_openid_ca_file=<path to local ca file to use> - -# Request header auth -#openshift_master_identity_providers=[{"name": "my_request_header_provider", "challenge": "true", "login": "true", "kind": "RequestHeaderIdentityProvider", "challengeURL": "https://www.example.com/challenging-proxy/oauth/authorize?${query}", "loginURL": "https://www.example.com/login-proxy/oauth/authorize?${query}", "clientCA": "my-request-header-ca.crt", "clientCommonNames": ["my-auth-proxy"], "headers": ["X-Remote-User", "SSO-User"], "emailHeaders": ["X-Remote-User-Email"], "nameHeaders": ["X-Remote-User-Display-Name"], "preferredUsernameHeaders": ["X-Remote-User-Login"]}] -# -# Configure request header CA certificate -# Specify either the ASCII contents of the certificate or the path to -# the local file that will be copied to the remote host. CA -# certificate contents will be copied to master systems and saved -# within /etc/origin/master/ with a filename matching the "clientCA" -# key set within the RequestHeaderIdentityProvider. -# -#openshift_master_request_header_ca=<ca text> -# or -#openshift_master_request_header_ca_file=<path to local ca file to use> - -# CloudForms Management Engine (ManageIQ) App Install -# -# Enables installation of MIQ server. Recommended for dedicated -# clusters only. See roles/openshift_cfme/README.md for instructions -# and requirements. -#openshift_cfme_install_app=False - -# Cloud Provider Configuration -# -# Note: You may make use of environment variables rather than store -# sensitive configuration within the ansible inventory. -# For example: -#openshift_cloudprovider_aws_access_key="{{ lookup('env','AWS_ACCESS_KEY_ID') }}" -#openshift_cloudprovider_aws_secret_key="{{ lookup('env','AWS_SECRET_ACCESS_KEY') }}" -# -# AWS -#openshift_cloudprovider_kind=aws -# Note: IAM profiles may be used instead of storing API credentials on disk. -#openshift_cloudprovider_aws_access_key=aws_access_key_id -#openshift_cloudprovider_aws_secret_key=aws_secret_access_key -# -# Openstack -#openshift_cloudprovider_kind=openstack -#openshift_cloudprovider_openstack_auth_url=http://openstack.example.com:35357/v2.0/ -#openshift_cloudprovider_openstack_username=username -#openshift_cloudprovider_openstack_password=password -#openshift_cloudprovider_openstack_domain_id=domain_id -#openshift_cloudprovider_openstack_domain_name=domain_name -#openshift_cloudprovider_openstack_tenant_id=tenant_id -#openshift_cloudprovider_openstack_tenant_name=tenant_name -#openshift_cloudprovider_openstack_region=region -#openshift_cloudprovider_openstack_lb_subnet_id=subnet_id -# -# GCE -#openshift_cloudprovider_kind=gce - -# Project Configuration -#osm_project_request_message='' -#osm_project_request_template='' -#osm_mcs_allocator_range='s0:/2' -#osm_mcs_labels_per_project=5 -#osm_uid_allocator_range='1000000000-1999999999/10000' - -# Configure additional projects -#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} - -# Enable cockpit -#osm_use_cockpit=true -# -# Set cockpit plugins -#osm_cockpit_plugins=['cockpit-kubernetes'] - -# Native high availability cluster method with optional load balancer. -# If no lb group is defined, the installer assumes that a load balancer has -# been preconfigured. For installation the value of -# openshift_master_cluster_hostname must resolve to the load balancer -# or to one or all of the masters defined in the inventory if no load -# balancer is present. -#openshift_master_cluster_method=native -#openshift_master_cluster_hostname=openshift-ansible.test.example.com -#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com - -# Pacemaker high availability cluster method. -# Pacemaker HA environment must be able to self provision the -# configured VIP. For installation openshift_master_cluster_hostname -# must resolve to the configured VIP. -#openshift_master_cluster_method=pacemaker -#openshift_master_cluster_password=openshift_cluster -#openshift_master_cluster_vip=192.168.133.25 -#openshift_master_cluster_public_vip=192.168.133.25 -#openshift_master_cluster_hostname=openshift-ansible.test.example.com -#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com - -# Override the default controller lease ttl -#osm_controller_lease_ttl=30 - -# Configure controller arguments -#osm_controller_args={'resource-quota-sync-period': ['10s']} - -# Configure api server arguments -#osm_api_server_args={'max-requests-inflight': ['400']} - -# default subdomain to use for exposed routes -#openshift_master_default_subdomain=apps.test.example.com - -# additional cors origins -#osm_custom_cors_origins=['foo.example.com', 'bar.example.com'] - -# default project node selector -#osm_default_node_selector='region=primary' - -# Override the default pod eviction timeout -#openshift_master_pod_eviction_timeout=5m - -# Override the default oauth tokenConfig settings: -# openshift_master_access_token_max_seconds=86400 -# openshift_master_auth_token_max_seconds=500 - -# Override master servingInfo.maxRequestsInFlight -#openshift_master_max_requests_inflight=500 - -# Override master and node servingInfo.minTLSVersion and .cipherSuites -# valid TLS versions are VersionTLS10, VersionTLS11, VersionTLS12 -# example cipher suites override, valid cipher suites are https://golang.org/pkg/crypto/tls/#pkg-constants -#openshift_master_min_tls_version=VersionTLS12 -#openshift_master_cipher_suites=['TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256', '...'] -# -#openshift_node_min_tls_version=VersionTLS12 -#openshift_node_cipher_suites=['TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256', '...'] - -# default storage plugin dependencies to install, by default the ceph and -# glusterfs plugin dependencies will be installed, if available. -#osn_storage_plugin_deps=['ceph','glusterfs'] - -# OpenShift Router Options -# -# An OpenShift router will be created during install if there are -# nodes present with labels matching the default router selector, -# "region=infra". Set openshift_node_labels per node as needed in -# order to label nodes. -# -# Example: -# [nodes] -# node.example.com openshift_node_labels="{'region': 'infra'}" -# -# Router selector (optional) -# Router will only be created if nodes matching this label are present. -# Default value: 'region=infra' -#openshift_hosted_router_selector='region=infra' -# -# Router replicas (optional) -# Unless specified, openshift-ansible will calculate the replica count -# based on the number of nodes matching the openshift router selector. -#openshift_hosted_router_replicas=2 -# -# Router force subdomain (optional) -# A router path format to force on all routes used by this router -# (will ignore the route host value) -#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' -# -# Router certificate (optional) -# Provide local certificate paths which will be configured as the -# router's default certificate. -#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} -# -# Manage the OpenShift Router (optional) -#openshift_hosted_manage_router=true -# -# Router sharding support has been added and can be achieved by supplying the correct -# data to the inventory. The variable to house the data is openshift_hosted_routers -# and is in the form of a list. If no data is passed then a default router will be -# created. There are multiple combinations of router sharding. The one described -# below supports routers on separate nodes. -# -#openshift_hosted_routers=[{'name': 'router1', 'certificate': {'certfile': '/path/to/certificate/abc.crt', 'keyfile': '/path/to/certificate/abc.key', 'cafile': '/path/to/certificate/ca.crt'}, 'replicas': 1, 'serviceaccount': 'router', 'namespace': 'default', 'stats_port': 1936, 'edits': [], 'images': 'openshift3/ose-${component}:${version}', 'selector': 'type=router1', 'ports': ['80:80', '443:443']}, {'name': 'router2', 'certificate': {'certfile': '/path/to/certificate/xyz.crt', 'keyfile': '/path/to/certificate/xyz.key', 'cafile': '/path/to/certificate/ca.crt'}, 'replicas': 1, 'serviceaccount': 'router', 'namespace': 'default', 'stats_port': 1936, 'edits': [{'action': 'append', 'key': 'spec.template.spec.containers[0].env', 'value': {'name': 'ROUTE_LABELS', 'value': 'route=external'}}], 'images': 'openshift3/ose-${component}:${version}', 'selector': 'type=router2', 'ports': ['80:80', '443:443']}] - -# OpenShift Registry Console Options -# Override the console image prefix for enterprise deployments, not used in origin -# default is "registry.access.redhat.com/openshift3/" and the image appended is "registry-console" -#openshift_cockpit_deployer_prefix=registry.example.com/myrepo/ -# Override image version, defaults to latest for origin, matches the product version for enterprise -#openshift_cockpit_deployer_version=1.4.1 - -# Openshift Registry Options -# -# An OpenShift registry will be created during install if there are -# nodes present with labels matching the default registry selector, -# "region=infra". Set openshift_node_labels per node as needed in -# order to label nodes. -# -# Example: -# [nodes] -# node.example.com openshift_node_labels="{'region': 'infra'}" -# -# Registry selector (optional) -# Registry will only be created if nodes matching this label are present. -# Default value: 'region=infra' -#openshift_hosted_registry_selector='region=infra' -# -# Registry replicas (optional) -# Unless specified, openshift-ansible will calculate the replica count -# based on the number of nodes matching the openshift registry selector. -#openshift_hosted_registry_replicas=2 -# -# Validity of the auto-generated certificate in days (optional) -#openshift_hosted_registry_cert_expire_days=730 -# -# Manage the OpenShift Registry (optional) -#openshift_hosted_manage_registry=true - -# Registry Storage Options -# -# NFS Host Group -# An NFS volume will be created with path "nfs_directory/volume_name" -# on the host within the [nfs] host group. For example, the volume -# path using these options would be "/exports/registry" -#openshift_hosted_registry_storage_kind=nfs -#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -# nfs_directory must conform to DNS-1123 subdomain must consist of lower case -# alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character -#openshift_hosted_registry_storage_nfs_directory=/exports -#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' -#openshift_hosted_registry_storage_volume_name=registry -#openshift_hosted_registry_storage_volume_size=10Gi -# -# External NFS Host -# NFS volume must already exist with path "nfs_directory/_volume_name" on -# the storage_host. For example, the remote volume path using these -# options would be "nfs.example.com:/exports/registry" -#openshift_hosted_registry_storage_kind=nfs -#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -#openshift_hosted_registry_storage_host=nfs.example.com -# nfs_directory must conform to DNS-1123 subdomain must consist of lower case -# alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character -#openshift_hosted_registry_storage_nfs_directory=/exports -#openshift_hosted_registry_storage_volume_name=registry -#openshift_hosted_registry_storage_volume_size=10Gi -# -# Openstack -# Volume must already exist. -#openshift_hosted_registry_storage_kind=openstack -#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] -#openshift_hosted_registry_storage_openstack_filesystem=ext4 -#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 -#openshift_hosted_registry_storage_volume_size=10Gi -# -# AWS S3 -# -# S3 bucket must already exist. -#openshift_hosted_registry_storage_kind=object -#openshift_hosted_registry_storage_provider=s3 -#openshift_hosted_registry_storage_s3_encrypt=false -#openshift_hosted_registry_storage_s3_kmskeyid=aws_kms_key_id -#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id -#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key -#openshift_hosted_registry_storage_s3_bucket=bucket_name -#openshift_hosted_registry_storage_s3_region=bucket_region -#openshift_hosted_registry_storage_s3_chunksize=26214400 -#openshift_hosted_registry_storage_s3_rootdirectory=/registry -#openshift_hosted_registry_pullthrough=true -#openshift_hosted_registry_acceptschema2=true -#openshift_hosted_registry_enforcequota=true -# -# Any S3 service (Minio, ExoScale, ...): Basically the same as above -# but with regionendpoint configured -# S3 bucket must already exist. -#openshift_hosted_registry_storage_kind=object -#openshift_hosted_registry_storage_provider=s3 -#openshift_hosted_registry_storage_s3_accesskey=access_key_id -#openshift_hosted_registry_storage_s3_secretkey=secret_access_key -#openshift_hosted_registry_storage_s3_regionendpoint=https://myendpoint.example.com/ -#openshift_hosted_registry_storage_s3_bucket=bucket_name -#openshift_hosted_registry_storage_s3_region=bucket_region -#openshift_hosted_registry_storage_s3_chunksize=26214400 -#openshift_hosted_registry_storage_s3_rootdirectory=/registry -#openshift_hosted_registry_pullthrough=true -#openshift_hosted_registry_acceptschema2=true -#openshift_hosted_registry_enforcequota=true -# -# Additional CloudFront Options. When using CloudFront all three -# of the followingg variables must be defined. -#openshift_hosted_registry_storage_s3_cloudfront_baseurl=https://myendpoint.cloudfront.net/ -#openshift_hosted_registry_storage_s3_cloudfront_privatekeyfile=/full/path/to/secret.pem -#openshift_hosted_registry_storage_s3_cloudfront_keypairid=yourpairid - -# Metrics deployment -# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html -# -# By default metrics are not automatically deployed, set this to enable them -#openshift_metrics_install_metrics=true -# -# Storage Options -# If openshift_metrics_storage_kind is unset then metrics will be stored -# in an EmptyDir volume and will be deleted when the cassandra pod terminates. -# Storage options A & B currently support only one cassandra pod which is -# generally enough for up to 1000 pods. Additional volumes can be created -# manually after the fact and metrics scaled per the docs. -# -# Option A - NFS Host Group -# An NFS volume will be created with path "nfs_directory/volume_name" -# on the host within the [nfs] host group. For example, the volume -# path using these options would be "/exports/metrics" -#openshift_metrics_storage_kind=nfs -#openshift_metrics_storage_access_modes=['ReadWriteOnce'] -#openshift_metrics_storage_nfs_directory=/exports -#openshift_metrics_storage_nfs_options='*(rw,root_squash)' -#openshift_metrics_storage_volume_name=metrics -#openshift_metrics_storage_volume_size=10Gi -#openshift_metrics_storage_labels={'storage': 'metrics'} -# -# Option B - External NFS Host -# NFS volume must already exist with path "nfs_directory/_volume_name" on -# the storage_host. For example, the remote volume path using these -# options would be "nfs.example.com:/exports/metrics" -#openshift_metrics_storage_kind=nfs -#openshift_metrics_storage_access_modes=['ReadWriteOnce'] -#openshift_metrics_storage_host=nfs.example.com -#openshift_metrics_storage_nfs_directory=/exports -#openshift_metrics_storage_volume_name=metrics -#openshift_metrics_storage_volume_size=10Gi -#openshift_metrics_storage_labels={'storage': 'metrics'} -# -# Option C - Dynamic -- If openshift supports dynamic volume provisioning for -# your cloud platform use this. -#openshift_metrics_storage_kind=dynamic -# -# Other Metrics Options -- Common items you may wish to reconfigure, for the complete -# list of options please see roles/openshift_metrics/README.md -# -# Override metricsPublicURL in the master config for cluster metrics -# Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics -# Currently, you may only alter the hostname portion of the url, alterting the -# `/hawkular/metrics` path will break installation of metrics. -#openshift_metrics_hawkular_hostname=hawkular-metrics.example.com -# Configure the prefix and version for the component images -#openshift_metrics_image_prefix=registry.example.com:8888/openshift3/ -#openshift_metrics_image_version=3.7.0 -# -# StorageClass -# openshift_storageclass_name=gp2 -# openshift_storageclass_parameters={'type': 'gp2', 'encrypted': 'false'} -# - -# Logging deployment -# -# Currently logging deployment is disabled by default, enable it by setting this -#openshift_logging_install_logging=true -# -# Logging storage config -# Option A - NFS Host Group -# An NFS volume will be created with path "nfs_directory/volume_name" -# on the host within the [nfs] host group. For example, the volume -# path using these options would be "/exports/logging" -#openshift_logging_storage_kind=nfs -#openshift_logging_storage_access_modes=['ReadWriteOnce'] -#openshift_logging_storage_nfs_directory=/exports -#openshift_logging_storage_nfs_options='*(rw,root_squash)' -#openshift_logging_storage_volume_name=logging -#openshift_logging_storage_volume_size=10Gi -#openshift_logging_storage_labels={'storage': 'logging'} -# -# Option B - External NFS Host -# NFS volume must already exist with path "nfs_directory/_volume_name" on -# the storage_host. For example, the remote volume path using these -# options would be "nfs.example.com:/exports/logging" -#openshift_logging_storage_kind=nfs -#openshift_logging_storage_access_modes=['ReadWriteOnce'] -#openshift_logging_storage_host=nfs.example.com -#openshift_logging_storage_nfs_directory=/exports -#openshift_logging_storage_volume_name=logging -#openshift_logging_storage_volume_size=10Gi -#openshift_logging_storage_labels={'storage': 'logging'} -# -# Option C - Dynamic -- If openshift supports dynamic volume provisioning for -# your cloud platform use this. -#openshift_logging_storage_kind=dynamic -# -# Option D - none -- Logging will use emptydir volumes which are destroyed when -# pods are deleted -# -# Other Logging Options -- Common items you may wish to reconfigure, for the complete -# list of options please see roles/openshift_logging/README.md -# -# Configure loggingPublicURL in the master config for aggregate logging, defaults -# to kibana.{{ openshift_master_default_subdomain }} -#openshift_logging_kibana_hostname=logging.apps.example.com -# Configure the number of elastic search nodes, unless you're using dynamic provisioning -# this value must be 1 -#openshift_logging_es_cluster_size=1 -# Configure the prefix and version for the component images -#openshift_logging_image_prefix=registry.example.com:8888/openshift3/ -#openshift_logging_image_version=3.7.0 - -# Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') -# os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' - -# Disable the OpenShift SDN plugin -# openshift_use_openshift_sdn=False - -# Configure SDN cluster network and kubernetes service CIDR blocks. These -# network blocks should be private and should not conflict with network blocks -# in your infrastructure that pods may require access to. Can not be changed -# after deployment. -# -# WARNING : Do not pick subnets that overlap with the default Docker bridge subnet of -# 172.17.0.0/16. Your installation will fail and/or your configuration change will -# cause the Pod SDN or Cluster SDN to fail. -# -# WORKAROUND : If you must use an overlapping subnet, you can configure a non conflicting -# docker0 CIDR range by adding '--bip=192.168.2.1/24' to DOCKER_NETWORK_OPTIONS -# environment variable located in /etc/sysconfig/docker-network. -# When upgrading or scaling up the following must match whats in your master config! -# Inventory: master yaml field -# osm_cluster_network_cidr: clusterNetworkCIDR -# openshift_portal_net: serviceNetworkCIDR -# When installing osm_cluster_network_cidr and openshift_portal_net must be set. -# Sane examples are provided below. -#osm_cluster_network_cidr=10.128.0.0/14 -#openshift_portal_net=172.30.0.0/16 - -# ExternalIPNetworkCIDRs controls what values are acceptable for the -# service external IP field. If empty, no externalIP may be set. It -# may contain a list of CIDRs which are checked for access. If a CIDR -# is prefixed with !, IPs in that CIDR will be rejected. Rejections -# will be applied first, then the IP checked against one of the -# allowed CIDRs. You should ensure this range does not overlap with -# your nodes, pods, or service CIDRs for security reasons. -#openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] - -# IngressIPNetworkCIDR controls the range to assign ingress IPs from for -# services of type LoadBalancer on bare metal. If empty, ingress IPs will not -# be assigned. It may contain a single CIDR that will be allocated from. For -# security reasons, you should ensure that this range does not overlap with -# the CIDRs reserved for external IPs, nodes, pods, or services. -#openshift_master_ingress_ip_network_cidr=172.46.0.0/16 - -# Configure number of bits to allocate to each host's subnet e.g. 9 -# would mean a /23 network on the host. -# When upgrading or scaling up the following must match whats in your master config! -# Inventory: master yaml field -# osm_host_subnet_length: hostSubnetLength -# When installing osm_host_subnet_length must be set. A sane example is provided below. -#osm_host_subnet_length=9 - -# Configure master API and console ports. -#openshift_master_api_port=8443 -#openshift_master_console_port=8443 - -# set RPM version for debugging purposes -#openshift_pkg_version=-3.1.0.0 - -# Configure custom ca certificate -#openshift_master_ca_certificate={'certfile': '/path/to/ca.crt', 'keyfile': '/path/to/ca.key'} -# -# NOTE: CA certificate will not be replaced with existing clusters. -# This option may only be specified when creating a new cluster or -# when redeploying cluster certificates with the redeploy-certificates -# playbook. - -# Configure custom named certificates (SNI certificates) -# -# https://docs.openshift.com/enterprise/latest/install_config/certificate_customization.html -# -# NOTE: openshift_master_named_certificates is cached on masters and is an -# additive fact, meaning that each run with a different set of certificates -# will add the newly provided certificates to the cached set of certificates. -# -# An optional CA may be specified for each named certificate. CAs will -# be added to the OpenShift CA bundle which allows for the named -# certificate to be served for internal cluster communication. -# -# If you would like openshift_master_named_certificates to be overwritten with -# the provided value, specify openshift_master_overwrite_named_certificates. -#openshift_master_overwrite_named_certificates=true -# -# Provide local certificate paths which will be deployed to masters -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] -# -# Detected names may be overridden by specifying the "names" key -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] - -# Session options -#openshift_master_session_name=ssn -#openshift_master_session_max_seconds=3600 - -# An authentication and encryption secret will be generated if secrets -# are not provided. If provided, openshift_master_session_auth_secrets -# and openshift_master_encryption_secrets must be equal length. -# -# Signing secrets, used to authenticate sessions using -# HMAC. Recommended to use secrets with 32 or 64 bytes. -#openshift_master_session_auth_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] -# -# Encrypting secrets, used to encrypt sessions. Must be 16, 24, or 32 -# characters long, to select AES-128, AES-192, or AES-256. -#openshift_master_session_encryption_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] - -# configure how often node iptables rules are refreshed -#openshift_node_iptables_sync_period=5s - -# Configure nodeIP in the node config -# This is needed in cases where node traffic is desired to go over an -# interface other than the default network interface. -#openshift_set_node_ip=True - -# Configure dnsIP in the node config -#openshift_dns_ip=172.30.0.1 - -# Configure node kubelet arguments. pods-per-core is valid in OpenShift Origin 1.3 or OpenShift Container Platform 3.3 and later. -#openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['85'], 'image-gc-low-threshold': ['80']} - -# Configure logrotate scripts -# See: https://github.com/nickhammond/ansible-logrotate -#logrotate_scripts=[{"name": "syslog", "path": "/var/log/cron\n/var/log/maillog\n/var/log/messages\n/var/log/secure\n/var/log/spooler\n", "options": ["daily", "rotate 7", "compress", "sharedscripts", "missingok"], "scripts": {"postrotate": "/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true"}}] - -# openshift-ansible will wait indefinitely for your input when it detects that the -# value of openshift_hostname resolves to an IP address not bound to any local -# interfaces. This mis-configuration is problematic for any pod leveraging host -# networking and liveness or readiness probes. -# Setting this variable to true will override that check. -#openshift_override_hostname_check=true - -# openshift_use_dnsmasq is deprecated. This must be true, or installs will fail -# in versions >= 3.6 -#openshift_use_dnsmasq=False -# Define an additional dnsmasq.conf file to deploy to /etc/dnsmasq.d/openshift-ansible.conf -# This is useful for POC environments where DNS may not actually be available yet or to set -# options like 'strict-order' to alter dnsmasq configuration. -#openshift_node_dnsmasq_additional_config_file=/home/bob/ose-dnsmasq.conf - -# Global Proxy Configuration -# These options configure HTTP_PROXY, HTTPS_PROXY, and NOPROXY environment -# variables for docker and master services. -# -# Hosts in the openshift_no_proxy list will NOT use any globally -# configured HTTP(S)_PROXYs. openshift_no_proxy accepts domains -# (.example.com), hosts (example.com), and IP addresses. -#openshift_http_proxy=http://USER:PASSWORD@IPADDR:PORT -#openshift_https_proxy=https://USER:PASSWORD@IPADDR:PORT -#openshift_no_proxy='.hosts.example.com,some-host.com' -# -# Most environments don't require a proxy between openshift masters, nodes, and -# etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. -# If all of your hosts share a common domain you may wish to disable this and -# specify that domain above instead. -# -# For example, having hosts with FQDNs: m1.ex.com, n1.ex.com, and -# n2.ex.com, one would simply add '.ex.com' to the openshift_no_proxy -# variable (above) and set this value to False -#openshift_generate_no_proxy_hosts=True -# -# These options configure the BuildDefaults admission controller which injects -# configuration into Builds. Proxy related values will default to the global proxy -# config values. You only need to set these if they differ from the global proxy settings. -# See BuildDefaults documentation at -# https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_no_proxy=mycorp.com -#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_git_no_proxy=mycorp.com -#openshift_builddefaults_image_labels=[{'name':'imagelabelname1','value':'imagelabelvalue1'}] -#openshift_builddefaults_nodeselectors={'nodelabel1':'nodelabelvalue1'} -#openshift_builddefaults_annotations={'annotationkey1':'annotationvalue1'} -#openshift_builddefaults_resources_requests_cpu=100m -#openshift_builddefaults_resources_requests_memory=256Mi -#openshift_builddefaults_resources_limits_cpu=1000m -#openshift_builddefaults_resources_limits_memory=512Mi - -# Or you may optionally define your own build defaults configuration serialized as json -#openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","gitNoProxy":"ose3-master.example.com","kind":"BuildDefaultsConfig"}}}' - -# These options configure the BuildOverrides admission controller which injects -# configuration into Builds. -# See BuildOverrides documentation at -# https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_buildoverrides_force_pull=true -#openshift_buildoverrides_image_labels=[{'name':'imagelabelname1','value':'imagelabelvalue1'}] -#openshift_buildoverrides_nodeselectors={'nodelabel1':'nodelabelvalue1'} -#openshift_buildoverrides_annotations={'annotationkey1':'annotationvalue1'} - -# Or you may optionally define your own build overrides configuration serialized as json -#openshift_buildoverrides_json='{"BuildOverrides":{"configuration":{"apiVersion":"v1","kind":"BuildDefaultsConfig","forcePull":"true"}}}' - -# Enable template service broker by specifying one of more namespaces whose -# templates will be served by the broker -#openshift_template_service_broker_namespaces=['openshift'] - -# masterConfig.volumeConfig.dynamicProvisioningEnabled, configurable as of 1.2/3.2, enabled by default -#openshift_master_dynamic_provisioning_enabled=False - -# Admission plugin config -#openshift_master_admission_plugin_config={"ProjectRequestLimit":{"configuration":{"apiVersion":"v1","kind":"ProjectRequestLimitConfig","limits":[{"selector":{"admin":"true"}},{"maxProjects":"1"}]}},"PodNodeConstraints":{"configuration":{"apiVersion":"v1","kind":"PodNodeConstraintsConfig"}}} - -# Configure usage of openshift_clock role. -#openshift_clock_enabled=true - -# OpenShift Per-Service Environment Variables -# Environment variables are added to /etc/sysconfig files for -# each OpenShift service: node, master (api and controllers). -# API and controllers environment variables are merged in single -# master environments. -#openshift_master_api_env_vars={"ENABLE_HTTP2": "true"} -#openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"} -#openshift_node_env_vars={"ENABLE_HTTP2": "true"} - -# Enable API service auditing, available as of 3.2 -#openshift_master_audit_config={"enabled": true} -# -# In case you want more advanced setup for the auditlog you can -# use this line. -# The directory in "auditFilePath" will be created if it's not -# exist -#openshift_master_audit_config={"enabled": true, "auditFilePath": "/var/log/openpaas-oscp-audit/openpaas-oscp-audit.log", "maximumFileRetentionDays": 14, "maximumFileSizeMegabytes": 500, "maximumRetainedFiles": 5} - -# Validity of the auto-generated OpenShift certificates in days. -# See also openshift_hosted_registry_cert_expire_days above. -# -#openshift_ca_cert_expire_days=1825 -#openshift_node_cert_expire_days=730 -#openshift_master_cert_expire_days=730 - -# Validity of the auto-generated external etcd certificates in days. -# Controls validity for etcd CA, peer, server and client certificates. -# -#etcd_ca_default_days=1825 -# -# ServiceAccountConfig:LimitSecretRefences rejects pods that reference secrets their service accounts do not reference -# openshift_master_saconfig_limitsecretreferences=false - -# Upgrade Control -# -# By default nodes are upgraded in a serial manner one at a time and all failures -# are fatal, one set of variables for normal nodes, one set of variables for -# nodes that are part of control plane as the number of hosts may be different -# in those two groups. -#openshift_upgrade_nodes_serial=1 -#openshift_upgrade_nodes_max_fail_percentage=0 -#openshift_upgrade_control_plane_nodes_serial=1 -#openshift_upgrade_control_plane_nodes_max_fail_percentage=0 -# -# You can specify the number of nodes to upgrade at once. We do not currently -# attempt to verify that you have capacity to drain this many nodes at once -# so please be careful when specifying these values. You should also verify that -# the expected number of nodes are all schedulable and ready before starting an -# upgrade. If it's not possible to drain the requested nodes the upgrade will -# stall indefinitely until the drain is successful. -# -# If you're upgrading more than one node at a time you can specify the maximum -# percentage of failure within the batch before the upgrade is aborted. Any -# nodes that do fail are ignored for the rest of the playbook run and you should -# take care to investigate the failure and return the node to service so that -# your cluster. -# -# The percentage must exceed the value, this would fail on two failures -# openshift_upgrade_nodes_serial=4 openshift_upgrade_nodes_max_fail_percentage=49 -# where as this would not -# openshift_upgrade_nodes_serial=4 openshift_upgrade_nodes_max_fail_percentage=50 -# -# Multiple data migrations take place and if they fail they will fail the upgrade -# You may wish to disable these or make them non fatal -# -# openshift_upgrade_pre_storage_migration_enabled=true -# openshift_upgrade_pre_storage_migration_fatal==true -# openshift_upgrade_post_storage_migration_enabled=true -# openshift_upgrade_post_storage_migration_fatal==false - -# host group for masters -[masters] -ose3-master[1:3]-ansible.test.example.com - -[etcd] -ose3-etcd[1:3]-ansible.test.example.com - -# NOTE: Containerized load balancer hosts are not yet supported, if using a global -# containerized=true host variable we must set to false. -[lb] -ose3-lb-ansible.test.example.com containerized=false - -# NOTE: Currently we require that masters be part of the SDN which requires that they also be nodes -# However, in order to ensure that your masters are not burdened with running pods you should -# make them unschedulable by adding openshift_schedulable=False any node that's also a master. -[nodes] -ose3-master[1:3]-ansible.test.example.com -ose3-node[1:2]-ansible.test.example.com openshift_node_labels="{'region': 'primary', 'zone': 'default'}" - -# CloudForms/ManageIQ (CFME/MIQ) Configuration - -# See the readme for full descriptions and getting started -# instructions: ../../roles/openshift_cfme/README.md or go directly to -# their definitions: ../../roles/openshift_cfme/defaults/main.yml -# ../../roles/openshift_cfme/vars/main.yml -# -# Namespace for the CFME project -#openshift_cfme_project: openshift-cfme - -# Namespace/project description -#openshift_cfme_project_description: CloudForms Management Engine - -# Choose 'miq-template' for a podified database install -# Choose 'miq-template-ext-db' for an external database install -# -# If you are using the miq-template-ext-db template then you must add -# the required database parameters to the -# openshift_cfme_template_parameters variable. -#openshift_cfme_app_template: miq-template - -# Allowed options: nfs, nfs_external, preconfigured, cloudprovider. -#openshift_cfme_storage_class: nfs - -# [OPTIONAL] - If you are using an EXTERNAL NFS server, such as a -# netapp appliance, then you must set the hostname here. Leave the -# value as 'false' if you are not using external NFS. -#openshift_cfme_storage_nfs_external_hostname: false - -# [OPTIONAL] - If you are using external NFS then you must set the base -# path to the exports location here. -# -# Additionally: EXTERNAL NFS REQUIRES that YOU CREATE the nfs exports -# that will back the application PV and optionally the database -# pv. Export path definitions, relative to -# {{ openshift_cfme_storage_nfs_base_dir }} -# -# LOCAL NFS NOTE: -# -# You may may also change this value if you want to change the default -# path used for local NFS exports. -#openshift_cfme_storage_nfs_base_dir: /exports - -# LOCAL NFS NOTE: -# -# You may override the automatically selected LOCAL NFS server by -# setting this variable. Useful for testing specific task files. -#openshift_cfme_storage_nfs_local_hostname: false - -# A hash of parameters you want to override or set in the -# miq-template.yaml or miq-template-ext-db.yaml templates. Set this in -# your inventory file as a simple hash. Acceptable values are defined -# under the .parameters list in files/miq-template{-ext-db}.yaml -# Example: -# -# openshift_cfme_template_parameters={'APPLICATION_MEM_REQ': '512Mi'} -#openshift_cfme_template_parameters: {} |