diff options
Diffstat (limited to 'roles/kuryr/templates')
| -rw-r--r-- | roles/kuryr/templates/cni-daemonset.yaml.j2 | 19 | ||||
| -rw-r--r-- | roles/kuryr/templates/configmap.yaml.j2 | 357 |
2 files changed, 354 insertions, 22 deletions
diff --git a/roles/kuryr/templates/cni-daemonset.yaml.j2 b/roles/kuryr/templates/cni-daemonset.yaml.j2 index 39348ae90..09f4c7dfe 100644 --- a/roles/kuryr/templates/cni-daemonset.yaml.j2 +++ b/roles/kuryr/templates/cni-daemonset.yaml.j2 @@ -26,6 +26,13 @@ spec: image: kuryr/cni:latest imagePullPolicy: IfNotPresent command: [ "cni_ds_init" ] + env: + - name: CNI_DAEMON + value: "True" + - name: KUBERNETES_NODE_NAME + valueFrom: + fieldRef: + fieldPath: spec.nodeName securityContext: privileged: true volumeMounts: @@ -38,6 +45,10 @@ spec: subPath: kuryr-cni.conf - name: etc mountPath: /etc + - name: proc + mountPath: /host_proc + - name: openvswitch + mountPath: /var/run/openvswitch volumes: - name: bin hostPath: @@ -50,4 +61,10 @@ spec: name: kuryr-config - name: etc hostPath: - path: /etc
\ No newline at end of file + path: /etc + - name: proc + hostPath: + path: /proc + - name: openvswitch + hostPath: + path: /var/run/openvswitch diff --git a/roles/kuryr/templates/configmap.yaml.j2 b/roles/kuryr/templates/configmap.yaml.j2 index 96c215f00..4bf1dbddf 100644 --- a/roles/kuryr/templates/configmap.yaml.j2 +++ b/roles/kuryr/templates/configmap.yaml.j2 @@ -16,17 +16,17 @@ data: # Directory for Kuryr vif binding executables. (string value) #bindir = /usr/libexec/kuryr + # Neutron subnetpool name will be prefixed by this. (string value) + #subnetpool_name_prefix = kuryrPool + + # baremetal or nested-containers are the supported values. (string value) + #deployment_type = baremetal + # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. #debug = false - # DEPRECATED: If set to false, the logging level will be set to WARNING instead - # of the default INFO level. (boolean value) - # This option is deprecated for removal. - # Its value may be silently ignored in the future. - #verbose = true - # The name of a logging configuration file. This file is appended to any # existing logging configuration files. For details about logging configuration # files, see the Python logging module documentation. Note that when logging @@ -46,7 +46,7 @@ data: # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile - #log_file = /var/log/kuryr/kuryr-controller.log + #log_file = <None> # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) @@ -65,13 +65,19 @@ data: # is set. (boolean value) #use_syslog = false + # Enable journald for logging. If running in a systemd environment you may wish + # to enable journal support. Doing so will use the journal native protocol + # which includes structured metadata in addition to log messages.This option is + # ignored if log_config_append is set. (boolean value) + #use_journal = false + # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER # Log output to standard error. This option is ignored if log_config_append is # set. (boolean value) - #use_stderr = true + #use_stderr = false # Format string to use for log messages with context. (string value) #logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s @@ -93,7 +99,7 @@ data: # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) - #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO + #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false @@ -106,15 +112,86 @@ data: # value) #instance_uuid_format = "[instance: %(uuid)s] " + # Interval, number of seconds, of log rate limiting. (integer value) + #rate_limit_interval = 0 + + # Maximum number of logged messages per rate_limit_interval. (integer value) + #rate_limit_burst = 0 + + # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG + # or empty string. Logs with level greater or equal to rate_limit_except_level + # are not filtered. An empty string means that all levels are filtered. (string + # value) + #rate_limit_except_level = CRITICAL + # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false [binding] + # Configuration options for container interface binding. - driver = kuryr.lib.binding.drivers.vlan + # + # From kuryr_kubernetes + # + + # The name prefix of the veth endpoint put inside the container. (string value) + #veth_dst_prefix = eth + + # Driver to use for binding and unbinding ports. (string value) + # Deprecated group/name - [binding]/driver + #default_driver = kuryr.lib.binding.drivers.veth + + # Drivers to use for binding and unbinding ports. (list value) + #enabled_drivers = kuryr.lib.binding.drivers.veth + + # Specifies the name of the Nova instance interface to link the virtual devices + # to (only applicable to some binding drivers. (string value) link_iface = eth0 + driver = kuryr.lib.binding.drivers.vlan + + + [cni_daemon] + + # + # From kuryr_kubernetes + # + + # Enable CNI Daemon configuration. (boolean value) + daemon_enabled = true + + # Bind address for CNI daemon HTTP server. It is recommened to allow only local + # connections. (string value) + bind_address = 127.0.0.1:50036 + + # Maximum number of processes that will be spawned to process requests from CNI + # driver. (integer value) + #worker_num = 30 + + # Time (in seconds) the CNI daemon will wait for VIF annotation to appear in + # pod metadata before failing the CNI request. (integer value) + #vif_annotation_timeout = 120 + + # Kuryr uses pyroute2 library to manipulate networking interfaces. When + # processing a high number of Kuryr requests in parallel, it may take kernel + # more time to process all networking stack changes. This option allows to tune + # internal pyroute2 timeout. (integer value) + #pyroute2_timeout = 30 + + # Set to True when you are running kuryr-daemon inside a Docker container on + # Kubernetes host. E.g. as DaemonSet on Kubernetes cluster Kuryr is supposed to + # provide networking for. This mainly means thatkuryr-daemon will look for + # network namespaces in $netns_proc_dir instead of /proc. (boolean value) + docker_mode = true + + # When docker_mode is set to True, this config option should be set to where + # host's /proc directory is mounted. Please note that mounting it is necessary + # to allow Kuryr-Kubernetes to move host interfaces between host network + # namespaces, which is essential for Kuryr to work. (string value) + netns_proc_dir = /host_proc + + [kubernetes] # @@ -164,11 +241,6 @@ data: # The driver that manages VIFs pools for Kubernetes Pods (string value) vif_pool_driver = {{ kuryr_openstack_enable_pools | default(False) | ternary('nested', 'noop') }} - [vif_pool] - ports_pool_max = {{ kuryr_openstack_pool_max | default(0) }} - ports_pool_min = {{ kuryr_openstack_pool_min | default(1) }} - ports_pool_batch = {{ kuryr_openstack_pool_batch | default(5) }} - ports_pool_update_frequency = {{ kuryr_openstack_pool_update_frequency | default(20) }} [neutron] # Configuration options for OpenStack Neutron @@ -232,13 +304,55 @@ data: external_svc_subnet = {{ kuryr_openstack_external_svc_subnet_id }} [pod_vif_nested] + worker_nodes_subnet = {{ kuryr_openstack_worker_nodes_subnet_id }} + + + [pool_manager] + + # + # From kuryr_kubernetes + # + + # Absolute path to socket file that will be used for communication with the + # Pool Manager daemon (string value) + #sock_file = /run/kuryr/kuryr_manage.sock + + + [vif_pool] + + # + # From kuryr_kubernetes + # + + # Set a maximun amount of ports per pool. 0 to disable (integer value) + ports_pool_max = {{ kuryr_openstack_pool_max | default(0) }} + + # Set a target minimum size of the pool of ports (integer value) + ports_pool_min = {{ kuryr_openstack_pool_min | default(1) }} + + # Number of ports to be created in a bulk request (integer value) + ports_pool_batch = {{ kuryr_openstack_pool_batch | default(5) }} + + # Minimun interval (in seconds) between pool updates (integer value) + ports_pool_update_frequency = {{ kuryr_openstack_pool_update_frequency | default(20) }} + kuryr-cni.conf: |+ [DEFAULT] # # From kuryr_kubernetes # + + # Directory for Kuryr vif binding executables. (string value) + #bindir = /usr/libexec/kuryr + + # Neutron subnetpool name will be prefixed by this. (string value) + #subnetpool_name_prefix = kuryrPool + + # baremetal or nested-containers are the supported values. (string value) + #deployment_type = baremetal + # If set to true, the logging level will be set to DEBUG instead of the default # INFO level. (boolean value) # Note: This option can be changed without restarting. @@ -263,7 +377,7 @@ data: # logging will go to stderr as defined by use_stderr. This option is ignored if # log_config_append is set. (string value) # Deprecated group/name - [DEFAULT]/logfile - #log_file = /var/log/kuryr/cni.log + #log_file = <None> # (Optional) The base directory used for relative log_file paths. This option # is ignored if log_config_append is set. (string value) @@ -282,6 +396,12 @@ data: # is set. (boolean value) #use_syslog = false + # Enable journald for logging. If running in a systemd environment you may wish + # to enable journal support. Doing so will use the journal native protocol + # which includes structured metadata in addition to log messages.This option is + # ignored if log_config_append is set. (boolean value) + #use_journal = false + # Syslog facility to receive log lines. This option is ignored if # log_config_append is set. (string value) #syslog_log_facility = LOG_USER @@ -310,7 +430,7 @@ data: # List of package logging levels in logger=LEVEL pairs. This option is ignored # if log_config_append is set. (list value) - #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO + #default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,oslo_messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO # Enables or disables publication of error events. (boolean value) #publish_errors = false @@ -323,14 +443,85 @@ data: # value) #instance_uuid_format = "[instance: %(uuid)s] " + # Interval, number of seconds, of log rate limiting. (integer value) + #rate_limit_interval = 0 + + # Maximum number of logged messages per rate_limit_interval. (integer value) + #rate_limit_burst = 0 + + # Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG + # or empty string. Logs with level greater or equal to rate_limit_except_level + # are not filtered. An empty string means that all levels are filtered. (string + # value) + #rate_limit_except_level = CRITICAL + # Enables or disables fatal status of deprecations. (boolean value) #fatal_deprecations = false [binding] + # Configuration options for container interface binding. + + # + # From kuryr_kubernetes + # + + # The name prefix of the veth endpoint put inside the container. (string value) + #veth_dst_prefix = eth + + # Driver to use for binding and unbinding ports. (string value) + # Deprecated group/name - [binding]/driver + #default_driver = kuryr.lib.binding.drivers.veth + + # Drivers to use for binding and unbinding ports. (list value) + #enabled_drivers = kuryr.lib.binding.drivers.veth + + # Specifies the name of the Nova instance interface to link the virtual devices + # to (only applicable to some binding drivers. (string value) + link_iface = eth0 driver = kuryr.lib.binding.drivers.vlan - link_iface = {{ kuryr_cni_link_interface }} + + + [cni_daemon] + + # + # From kuryr_kubernetes + # + + # Enable CNI Daemon configuration. (boolean value) + daemon_enabled = true + + # Bind address for CNI daemon HTTP server. It is recommened to allow only local + # connections. (string value) + bind_address = 127.0.0.1:50036 + + # Maximum number of processes that will be spawned to process requests from CNI + # driver. (integer value) + #worker_num = 30 + + # Time (in seconds) the CNI daemon will wait for VIF annotation to appear in + # pod metadata before failing the CNI request. (integer value) + #vif_annotation_timeout = 120 + + # Kuryr uses pyroute2 library to manipulate networking interfaces. When + # processing a high number of Kuryr requests in parallel, it may take kernel + # more time to process all networking stack changes. This option allows to tune + # internal pyroute2 timeout. (integer value) + #pyroute2_timeout = 30 + + # Set to True when you are running kuryr-daemon inside a Docker container on + # Kubernetes host. E.g. as DaemonSet on Kubernetes cluster Kuryr is supposed to + # provide networking for. This mainly means thatkuryr-daemon will look for + # network namespaces in $netns_proc_dir instead of /proc. (boolean value) + docker_mode = true + + # When docker_mode is set to True, this config option should be set to where + # host's /proc directory is mounted. Please note that mounting it is necessary + # to allow Kuryr-Kubernetes to move host interfaces between host network + # namespaces, which is essential for Kuryr to work. (string value) + netns_proc_dir = /host_proc + [kubernetes] @@ -341,12 +532,136 @@ data: # The root URL of the Kubernetes API (string value) api_root = {{ openshift.master.api_url }} - # The token to talk to the k8s API - token_file = /etc/kuryr/token + # Absolute path to client cert to connect to HTTPS K8S_API (string value) + # ssl_client_crt_file = /etc/kuryr/controller.crt + + # Absolute path client key file to connect to HTTPS K8S_API (string value) + # ssl_client_key_file = /etc/kuryr/controller.key # Absolute path to ca cert file to connect to HTTPS K8S_API (string value) - ssl_ca_crt_file = /etc/kuryr/ca.crt + ssl_ca_crt_file = /var/run/secrets/kubernetes.io/serviceaccount/ca.crt + + # The token to talk to the k8s API + token_file = /var/run/secrets/kubernetes.io/serviceaccount/token # HTTPS K8S_API server identity verification (boolean value) # TODO (apuimedo): Make configurable ssl_verify_server_crt = True + + # The driver to determine OpenStack project for pod ports (string value) + pod_project_driver = default + + # The driver to determine OpenStack project for services (string value) + service_project_driver = default + + # The driver to determine Neutron subnets for pod ports (string value) + pod_subnets_driver = default + + # The driver to determine Neutron subnets for services (string value) + service_subnets_driver = default + + # The driver to determine Neutron security groups for pods (string value) + pod_security_groups_driver = default + + # The driver to determine Neutron security groups for services (string value) + service_security_groups_driver = default + + # The driver that provides VIFs for Kubernetes Pods. (string value) + pod_vif_driver = nested-vlan + + # The driver that manages VIFs pools for Kubernetes Pods (string value) + vif_pool_driver = {{ kuryr_openstack_enable_pools | default(False) | ternary('nested', 'noop') }} + + [neutron] + # Configuration options for OpenStack Neutron + + # + # From kuryr_kubernetes + # + + # Authentication URL (string value) + auth_url = {{ kuryr_openstack_auth_url }} + + # Authentication type to load (string value) + # Deprecated group/name - [neutron]/auth_plugin + auth_type = password + + # Domain ID to scope to (string value) + user_domain_name = {{ kuryr_openstack_user_domain_name }} + + # User's password (string value) + password = {{ kuryr_openstack_password }} + + # Domain name containing project (string value) + project_domain_name = {{ kuryr_openstack_project_domain_name }} + + # Project ID to scope to (string value) + # Deprecated group/name - [neutron]/tenant-id + project_id = {{ kuryr_openstack_project_id }} + + # Token (string value) + #token = <None> + + # Trust ID (string value) + #trust_id = <None> + + # User's domain id (string value) + #user_domain_id = <None> + + # User id (string value) + #user_id = <None> + + # Username (string value) + # Deprecated group/name - [neutron]/user-name + username = {{kuryr_openstack_username }} + + # Whether a plugging operation is failed if the port to plug does not become + # active (boolean value) + #vif_plugging_is_fatal = false + + # Seconds to wait for port to become active (integer value) + #vif_plugging_timeout = 0 + + [neutron_defaults] + + pod_security_groups = {{ kuryr_openstack_pod_sg_id }} + pod_subnet = {{ kuryr_openstack_pod_subnet_id }} + service_subnet = {{ kuryr_openstack_service_subnet_id }} + project = {{ kuryr_openstack_pod_project_id }} + # TODO (apuimedo): Remove the duplicated line just after this one once the + # RDO packaging contains the upstream patch + worker_nodes_subnet = {{ kuryr_openstack_worker_nodes_subnet_id }} + + [pod_vif_nested] + + worker_nodes_subnet = {{ kuryr_openstack_worker_nodes_subnet_id }} + + + [pool_manager] + + # + # From kuryr_kubernetes + # + + # Absolute path to socket file that will be used for communication with the + # Pool Manager daemon (string value) + #sock_file = /run/kuryr/kuryr_manage.sock + + + [vif_pool] + + # + # From kuryr_kubernetes + # + + # Set a maximun amount of ports per pool. 0 to disable (integer value) + ports_pool_max = {{ kuryr_openstack_pool_max | default(0) }} + + # Set a target minimum size of the pool of ports (integer value) + ports_pool_min = {{ kuryr_openstack_pool_min | default(1) }} + + # Number of ports to be created in a bulk request (integer value) + ports_pool_batch = {{ kuryr_openstack_pool_batch | default(5) }} + + # Minimun interval (in seconds) between pool updates (integer value) + ports_pool_update_frequency = {{ kuryr_openstack_pool_update_frequency | default(20) }} |