Add HEB scripts and re-organize the structure

11 files changed, 181 insertions, 0 deletions

diff --git a/tests/heb/cfg/BoardOFF.sh b/tests/heb/cfg/BoardOFF.sh
new file mode 100755
index 0000000..351bcb8
--- /dev/null
+++ b/tests/heb/cfg/BoardOFF.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+
+echo " ************************************************************** "
+echo " 			Board OFF"
+echo " ************************************************************** "
+
+pci -w 0x9040 0x01
+sleep 0.5
+
+pci --stop-dma dma1
diff --git a/tests/heb/cfg/BoardOn.sh b/tests/heb/cfg/BoardOn.sh
new file mode 100755
index 0000000..b14c73b
--- /dev/null
+++ b/tests/heb/cfg/BoardOn.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+
+echo " ************************************************************** "
+echo "				Start DMA"
+echo " ************************************************************** "
+
+pci --start-dma dma1
+sleep 0.5
+pci  --list-dma-engines
+
+
+echo " ************************************************************** "
+echo " 			Board ON procedure"
+echo " ************************************************************** "
+
+pci -w 0x9040 0x01
+sleep 1
+
+echo "switch ON the power supply  --> FIRST <--"
+echo "Press a key to continue ...."
+read -n 1 -s
+
+echo "Switch ON T/Hs"
+pci -w 0x9040 0x3C1
+pci -r 0x9040 -s1
+
+echo "switch ON the power supply  --> SECOND <--"
+echo "Press a key to continue ...."
+read -n 1 -s
+
+echo "Switch ON ADCs"
+pci -w 0x9040 0x3F1
+pci -r 0x9040 -s1
+sleep 0.1
+
+
+pci -w 0x9040 0x3F0 
+pci -r 0x9040 -s1
+sleep 1
+
+echo " Status ................... "
+pci -r 0x9000 -s 40
+
+
+
+./PLL_conf_calib_3001.sh
+
+echo " Status ................... "
+pci -r 0x9000 -s 40
+
+
+echo " ************************************************************** "
+echo "				Board Ready"
+echo " ************************************************************** "
+
+
+echo " --> remember to run: ./Set_Default.sh"
diff --git a/tests/heb/cfg/README b/tests/heb/cfg/README
new file mode 100644
index 0000000..125bc0d
--- /dev/null
+++ b/tests/heb/cfg/README
@@ -0,0 +1,11 @@
+ - Initializing
+    ./BoardOn.sh
+    ./Set_Default.sh
+
+ - Configuring the size
+    pci -w 9020 0x20 (linear scale)
+
+    * Number of samples are determined by 0x9020 / 0x9028 (0x0e by default)
+    * For each sample is descibed by (184 / 2) * 128 bits
+    * Where most-significant bytes of 4 dwords (128 bit) are iterating 
+    from 0x00 to 0xb8 with step 0x02
diff --git a/tests/heb/cfg/Set_ADC_1_Delay.sh b/tests/heb/cfg/Set_ADC_1_Delay.sh
new file mode 100755
index 0000000..bd8f980
--- /dev/null
+++ b/tests/heb/cfg/Set_ADC_1_Delay.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+echo "Set CH_4 clock ADC 1 delay... "
+
+upfix=000501
+fixed=4
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_2_Delay.sh b/tests/heb/cfg/Set_ADC_2_Delay.sh
new file mode 100755
index 0000000..d6cdf75
--- /dev/null
+++ b/tests/heb/cfg/Set_ADC_2_Delay.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+echo "Set CH_5 clock ADC 2 delay... "
+
+upfix=000501
+fixed=5
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_3_Delay.sh b/tests/heb/cfg/Set_ADC_3_Delay.sh
new file mode 100755
index 0000000..567b977
--- /dev/null
+++ b/tests/heb/cfg/Set_ADC_3_Delay.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+echo "Set CH_6 clock ADC 3 delay... "
+
+upfix=000501
+fixed=6
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_4_Delay.sh b/tests/heb/cfg/Set_ADC_4_Delay.sh
new file mode 100755
index 0000000..d666595
--- /dev/null
+++ b/tests/heb/cfg/Set_ADC_4_Delay.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+echo "Set CH_7 clock ADC 4 delay... "
+
+upfix=000501
+fixed=7
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed
+
diff --git a/tests/heb/cfg/Set_Default.sh b/tests/heb/cfg/Set_Default.sh
new file mode 100755
index 0000000..0149bf0
--- /dev/null
+++ b/tests/heb/cfg/Set_Default.sh
@@ -0,0 +1,30 @@
+#!/bin/bash
+
+echo "Set Defaults delay value in the board... "
+
+./Set_FPGA_clock_delay.sh 0
+sleep 0.1
+
+ ./Set_Delay_chip.sh 16 16 16 16
+sleep 0.1
+
+./Set_TH_Delay.sh 12
+sleep 0.1
+
+./Set_ADC_1_Delay.sh 5
+sleep 0.1
+
+./Set_ADC_2_Delay.sh 5
+sleep 0.1
+
+./Set_ADC_3_Delay.sh 5
+sleep 0.1
+
+./Set_ADC_4_Delay.sh 5
+
+#pci -w 0x9020 200b20
+pci -w 0x9020 20
+pci -w 0x9028 e
+
+echo " DONE ................ "
+
diff --git a/tests/heb/cfg/Set_Delay_chip.sh b/tests/heb/cfg/Set_Delay_chip.sh
new file mode 100755
index 0000000..3d15cad
--- /dev/null
+++ b/tests/heb/cfg/Set_Delay_chip.sh
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+    zero=0
+    hex_val1=$(printf "%02x\n" $1)
+    hex_val2=$(printf "%02x\n" $2)
+    hex_val3=$(printf "%02x\n" $3)
+    hex_val4=$(printf "%02x\n" $4)
+
+    pci -w 0x9080 $zero$hex_val4$hex_val3$hex_val2$hex_val1
+    pci -r 0x9080 -s 1
+    sleep 0.5			    
diff --git a/tests/heb/cfg/Set_FPGA_clock_delay.sh b/tests/heb/cfg/Set_FPGA_clock_delay.sh
new file mode 100755
index 0000000..f4d0f46
--- /dev/null
+++ b/tests/heb/cfg/Set_FPGA_clock_delay.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+echo "Set delay on T/Hs signals... "
+
+upfix=000501
+fixed=0
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_TH_Delay.sh b/tests/heb/cfg/Set_TH_Delay.sh
new file mode 100755
index 0000000..9a6e58f
--- /dev/null
+++ b/tests/heb/cfg/Set_TH_Delay.sh
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+echo "Set delay on T/Hs signals... "
+
+upfix=000501
+fixed=3
+
+    hex_val=$(printf "%01x\n" $1)
+    echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
+    pci -w 0x9060 $upfix$hex_val$fixed