summaryrefslogtreecommitdiffstats
path: root/tests
diff options
context:
space:
mode:
authorSuren A. Chilingaryan <csa@suren.me>2015-04-27 02:28:57 +0200
committerSuren A. Chilingaryan <csa@suren.me>2015-04-27 02:28:57 +0200
commite1265fa32837f457ee2c2fa259d12c9545af4bbf (patch)
tree64b8d5f1c81c14f019047b0cb00cb77c2dcecf55 /tests
parenta37beb44d59cca329d0d9345c21505af81030688 (diff)
downloadipecamera-e1265fa32837f457ee2c2fa259d12c9545af4bbf.tar.gz
ipecamera-e1265fa32837f457ee2c2fa259d12c9545af4bbf.tar.bz2
ipecamera-e1265fa32837f457ee2c2fa259d12c9545af4bbf.tar.xz
ipecamera-e1265fa32837f457ee2c2fa259d12c9545af4bbf.zip
First stand-alone ipecamera implementation
Diffstat (limited to 'tests')
-rwxr-xr-xtests/autotrigger.sh (renamed from tests/ipecamera/autotrigger.sh)5
-rwxr-xr-xtests/debug/incomplete.sh (renamed from tests/ipecamera/debug/incomplete.sh)5
-rwxr-xr-xtests/dma/debug/test-iommu.sh19
-rwxr-xr-xtests/dma/ipe/bench.sh40
-rwxr-xr-xtests/dma/nwl/bench.sh30
-rwxr-xr-xtests/dma/nwl/cleanup.sh13
-rwxr-xr-xtests/dma/xilinx/xilinx_dma.sh121
-rwxr-xr-xtests/dma/xilinx/xilinx_dma_static_mem.sh117
-rwxr-xr-xtests/dump_file.sh3
-rwxr-xr-xtests/grab.sh24
-rwxr-xr-xtests/heb/DataTaking.sh96
-rwxr-xr-xtests/heb/cfg/BoardOFF.sh11
-rwxr-xr-xtests/heb/cfg/BoardOn.sh57
-rw-r--r--tests/heb/cfg/README11
-rwxr-xr-xtests/heb/cfg/Set_ADC_1_Delay.sh10
-rwxr-xr-xtests/heb/cfg/Set_ADC_2_Delay.sh10
-rwxr-xr-xtests/heb/cfg/Set_ADC_3_Delay.sh10
-rwxr-xr-xtests/heb/cfg/Set_ADC_4_Delay.sh11
-rwxr-xr-xtests/heb/cfg/Set_Default.sh30
-rwxr-xr-xtests/heb/cfg/Set_Delay_chip.sh11
-rwxr-xr-xtests/heb/cfg/Set_FPGA_clock_delay.sh10
-rwxr-xr-xtests/heb/cfg/Set_TH_Delay.sh10
-rwxr-xr-xtests/heb/debug/debug.sh45
-rwxr-xr-xtests/heb/debug/request_data.sh27
-rwxr-xr-xtests/ipecamera/bench.sh34
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh326
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh325
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh318
-rwxr-xr-xtests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh323
-rwxr-xr-xtests/ipecamera/frame.sh36
-rwxr-xr-xtests/ipecamera/frame_req.sh27
-rwxr-xr-xtests/ipecamera/grab-hwtrigger.sh20
-rwxr-xr-xtests/ipecamera/stimuli.sh30
-rwxr-xr-xtests/ipecamera/tests/loopback-test.sh87
-rwxr-xr-xtests/ipecamera/tests/run-and-decode-test.sh103
-rwxr-xr-xtests/new_device.sh3
36 files changed, 6 insertions, 2352 deletions
diff --git a/tests/ipecamera/autotrigger.sh b/tests/autotrigger.sh
index 5f8b4db..b7318c8 100755
--- a/tests/ipecamera/autotrigger.sh
+++ b/tests/autotrigger.sh
@@ -1,8 +1,9 @@
#! /bin/bash
function pci {
- PCILIB_PATH="../../"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
+ PCILIB_PATH=`which pci`
+ #LD_LIBRARY_PATH="$PCILIB_PATH"
+ $PCILIB_PATH/pci $*
}
echo "Starting the grabber"
diff --git a/tests/ipecamera/debug/incomplete.sh b/tests/debug/incomplete.sh
index 5c80198..090e638 100755
--- a/tests/ipecamera/debug/incomplete.sh
+++ b/tests/debug/incomplete.sh
@@ -1,8 +1,9 @@
#! /bin/bash
function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
+ PCILIB_PATH=`which pci`
+ #LD_LIBRARY_PATH="$PCILIB_PATH"
+ $PCILIB_PATH/pci $*
}
rm -f images.raw
diff --git a/tests/dma/debug/test-iommu.sh b/tests/dma/debug/test-iommu.sh
deleted file mode 100755
index 74e3ece..0000000
--- a/tests/dma/debug/test-iommu.sh
+++ /dev/null
@@ -1,19 +0,0 @@
-#! /bin/bash
-
-i=1
-while [ 1 ]; do
- pci --start-dma dma1r
- for name in /sys/class/fpga/fpga0/kbuf*; do
- bus_addr=0x`cat $name | grep "bus addr" | cut -d ':' -f 2 | sed -e 's/\s\+//g'`
- if [ $((bus_addr % 4096)) -ne 0 ]; then
-
- echo "Failed at iteration $i, $name"
- echo "----------------------"
- cat $name
- exit
- fi
-
- done
- pci --stop-dma dma1r
- i=$((i + 1))
-done
diff --git a/tests/dma/ipe/bench.sh b/tests/dma/ipe/bench.sh
deleted file mode 100755
index aa7ec25..0000000
--- a/tests/dma/ipe/bench.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/bash
-
-size=65536
-
-function pci {
- PCILIB_PATH=`pwd`/../../..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci -m kapture $*
-}
-
-
-rm -f bench.out
-
-echo "Stopping DMA and skipping exiting data..."
-pci --stop-dma dma0r
-echo "Starting DMA..."
-pci --start-dma dma0r
-echo "Enabling data generation..."
-pci -w 0x4 0x1
-
-# Clean DMA buffers
-#while [ $? -eq 0 ]; do
-# pci -r dma0 -s 65536 &> /dev/null
-#done
-
-echo "Reading the data from DMA..."
-for i in `seq 1 100`; do
- pci -r dma0 --multipacket -s $size -o bench.out
- if [ $? -ne 0 ]; then
- echo "Stopping DMA due to the error..."
- pci --stop-dma dma0r
- exit
- fi
-done
-
-echo "Stopping DMA..."
-pci --stop-dma dma0r
-
-../../../apps/check_counter bench.out
-
-#pci -r 0 -s 32
diff --git a/tests/dma/nwl/bench.sh b/tests/dma/nwl/bench.sh
deleted file mode 100755
index b36c251..0000000
--- a/tests/dma/nwl/bench.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-size=16
-bytes=`expr $size "*" 4`
-
-pci -w xrawdata_packet_length $bytes
-pci -w xrawdata_enable_loopback 0
-pci -w xrawdata_enable_generator 0
-
-pci --start-dma dma1
-
-while [ $? -eq 0 ]; do
- pci -r dma1 -s 65536 &> /dev/null
-done
-
-pci -w xrawdata_enable_loopback 1
-
-for i in `seq 1 10`; do
- pci -w dma1 -s $size "*$i"
- pci -r dma1 -s $size -o bench.out
-done
-
-pci --stop-dma dma1
-
-pci -w xrawdata_enable_loopback 0
diff --git a/tests/dma/nwl/cleanup.sh b/tests/dma/nwl/cleanup.sh
deleted file mode 100755
index 5ef568e..0000000
--- a/tests/dma/nwl/cleanup.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-pci --start-dma dma1r
-pci -w dma1r_reset_request 1
-pci -w dma1r_reset 1
-pci -r dma1r_running
-
-pci --free-kernel-memory dma
diff --git a/tests/dma/xilinx/xilinx_dma.sh b/tests/dma/xilinx/xilinx_dma.sh
deleted file mode 100755
index 6aada8b..0000000
--- a/tests/dma/xilinx/xilinx_dma.sh
+++ /dev/null
@@ -1,121 +0,0 @@
-#! /bin/bash
-
-BAR=0
-USE=1
-ITERATIONS=2
-BUFFERS=16
-
-function pci {
- PCILIB_PATH=`pwd`/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-
-function reset {
- pci -b $BAR -w 0 1
- usleep 1000
- pci -b $BAR -w 0 0
- pci -b $BAR -w 4 0
-}
-
-function read_cfg {
-# echo $1 1>&2
- pci -a config -r 0x$1 | awk '{ print $2; }'
-}
-
-function parse_config {
- info=0x`pci -b $BAR -r 0 | awk '{ print $2; }'`
- model=`printf "%X" $((info>>24))`
- if [ $model -eq 14 ]; then
- model="Xilinx Virtex-6"
- else
- model="Xilinx $model"
- fi
- version=$(((info >> 8) & 0xFF))
- data_width=$((16 * (2 ** ((info >> 16) & 0xF))))
-
- echo "$model, build $version, $data_width bits"
-
-
- next=`read_cfg 34 | cut -c 7-8`
-
- while [ $next -ne 0 ]; do
- cap=`read_cfg $next`
- capid=`echo $cap | cut -c 7-8`
- if [ $capid -eq 10 ]; then
- addr=`printf "%X" $((0x$next + 12))`
- pcie_link1=`read_cfg $addr`
- addr=`printf "%X" $((0x$next + 16))`
- pcie_link2=`read_cfg $addr`
-
- link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16)))
- link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20)))
-
- dev_link_speed=$((((0x$pcie_link1 & 0xF))))
- dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4)))
- fi
- next=`echo $cap | cut -c 5-6`
- done
-
- echo "Link: PCIe gen$link_speed x$link_width"
- if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then
- echo " * But device capable of gen$dev_link_speed x$dev_link_width"
- fi
-
- info=0x`read_cfg 40`
- max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5))))
- echo "TLP: 32 dwords (transfering 32 TLP per request)"
- if [ $max_tlp -ne 32 ]; then
- echo " * But device is able to transfer TLP up to $max_tlp bytes"
- fi
-
- # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding
- speed=$((link_width * link_speed * 2500 / 10))
-}
-
-reset
-parse_config
-
-pci --enable-irq
-pci --acknowledge-irq
-
-pci --free-kernel-memory $USE
-pci --alloc-kernel-memory $USE --type c2s -s $BUFFERS
-bus=`pci --list-kernel-memory 00100001 | awk '{ print $4; }' | grep 00`
-#ptr=`pci --list-kernel-memory 00100001 | awk '{ print $2; }' | grep 00`
-
-# TLP size
-pci -b $BAR -w 0x0C 0x20
-# TLP count
-pci -b $BAR -w 0x10 0x20
-# Data
-pci -b $BAR -w 0x14 0x13131313
-
-dmaperf=0
-for i in `seq 1 $ITERATIONS`; do
- for addr in $bus; do
- pci -b $BAR -w 0x08 0x$addr
-
-#Trigger
- pci -b $BAR -w 0x04 0x01
- pci --wait-irq
-# pci -b $BAR -w 0x04 0x00
-
- status=`pci -b $BAR -r 0x04 | awk '{print $2; }' | cut -c 5-8`
- if [ $status != "0101" ]; then
- echo "Read failed, invalid status: $status"
- fi
-
- dmaperf=$((dmaperf + 0x`pci -b $BAR -r 0x28 | awk '{print $2}'`))
- reset
- done
-done
-
-pci --free-kernel-memory $USE
-pci --disable-irq
-
-echo
-# Don't ask me about this formula
-echo "Performance reported by FPGA: $((4096 * BUFFERS * ITERATIONS * $speed / $dmaperf / 8)) MB/s"
-
-#pci -b $BAR -r 0 -s 32
diff --git a/tests/dma/xilinx/xilinx_dma_static_mem.sh b/tests/dma/xilinx/xilinx_dma_static_mem.sh
deleted file mode 100755
index e3ba0f5..0000000
--- a/tests/dma/xilinx/xilinx_dma_static_mem.sh
+++ /dev/null
@@ -1,117 +0,0 @@
-#! /bin/bash
-
-BAR=0
-USE=1
-ITERATIONS=1
-TLP_SIZE=32
-BUFFER_SIZE=8
-
-function pci {
- PCILIB_PATH=`pwd`/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-
-function reset {
- pci -b $BAR -w 0 1
- usleep 1000
- pci -b $BAR -w 0 0
- pci -b $BAR -w 4 0
-}
-
-function read_cfg {
-# echo $1 1>&2
- pci -a config -r 0x$1 | awk '{ print $2; }'
-}
-
-function parse_config {
- info=0x`pci -b $BAR -r 0 | awk '{ print $2; }'`
- model=`printf "%X" $((info>>24))`
- if [ $model -eq 14 ]; then
- model="Xilinx Virtex-6"
- else
- model="Xilinx $model"
- fi
- version=$(((info >> 8) & 0xFF))
- data_width=$((16 * (2 ** ((info >> 16) & 0xF))))
-
- echo "$model, build $version, $data_width bits"
-
-
- next=`read_cfg 34 | cut -c 7-8`
-
- while [ $next -ne 0 ]; do
- cap=`read_cfg $next`
- capid=`echo $cap | cut -c 7-8`
- if [ $capid -eq 10 ]; then
- addr=`printf "%X" $((0x$next + 12))`
- pcie_link1=`read_cfg $addr`
- addr=`printf "%X" $((0x$next + 16))`
- pcie_link2=`read_cfg $addr`
-
- link_speed=$((((0x$pcie_link2 & 0xF0000) >> 16)))
- link_width=$((((0x$pcie_link2 & 0x3F00000) >> 20)))
-
- dev_link_speed=$((((0x$pcie_link1 & 0xF))))
- dev_link_width=$((((0x$pcie_link1 & 0x3F0) >> 4)))
- fi
- next=`echo $cap | cut -c 5-6`
- done
-
- echo "Link: PCIe gen$link_speed x$link_width"
- if [ $link_speed -ne $dev_link_speed -o $link_width -ne $dev_link_width ]; then
- echo " * But device capable of gen$dev_link_speed x$dev_link_width"
- fi
-
- info=0x`read_cfg 40`
- max_tlp=$((2 ** (5 + ((info & 0xE0) >> 5))))
- echo "TLP: 32 dwords (transfering 32 TLP per request)"
- if [ $max_tlp -ne $TLP_SIZE ]; then
- echo " * But device is able to transfer TLP up to $max_tlp bytes"
- fi
-
- # 2500 MT/s, but PCIe gen1 and gen2 uses 10 bit encoding
- speed=$((link_width * link_speed * 2500 / 10))
-}
-
-reset
-parse_config
-
-pci --enable-irq
-pci --acknowledge-irq
-
-# TLP size
-pci -b $BAR -w 0x0C 0x`echo "obase=16; $TLP_SIZE" | bc`
-# TLP count
-pci -b $BAR -w 0x10 0x`echo "obase=16; $BUFFER_SIZE * 1024 * 1024 / $TLP_SIZE / 4" | bc`
-# Data
-pci -b $BAR -w 0x14 0x13131313
-
-bus="80000000"
-dmaperf=0
-for i in `seq 1 $ITERATIONS`; do
- for addr in $bus; do
- pci -b $BAR -w 0x08 0x$addr
-
-#Trigger
- pci -b $BAR -w 0x04 0x01
- pci --wait-irq
-
- status=`pci -b $BAR -r 0x04 | awk '{print $2; }' | cut -c 5-8`
- if [ $status != "0101" ]; then
- echo "Read failed, invalid status: $status"
- fi
-
- dmaperf=$((dmaperf + 0x`pci -b $BAR -r 0x28 | awk '{print $2}'`))
- reset
- done
-done
-
-pci --free-kernel-memory $USE
-pci --disable-irq
-
-echo
-# Don't ask me about this formula
-echo "Performance reported by FPGA: $(($BUFFER_SIZE * 1024 * 1024 * ITERATIONS * $speed / $dmaperf / 8)) MB/s"
-
-#pci -b $BAR -r 0 -s 32
diff --git a/tests/dump_file.sh b/tests/dump_file.sh
deleted file mode 100755
index 6773a19..0000000
--- a/tests/dump_file.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/bash
-
-hexdump -e ' "0x%08.8_ax: " 4/4 " 0x%08x " "\n" ' $1 | less
diff --git a/tests/grab.sh b/tests/grab.sh
deleted file mode 100755
index daf142e..0000000
--- a/tests/grab.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#! /bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f images.raw
-
-
-echo "Starting the grabber"
-pci -g -o images.raw --run-time 3000000 &
-pid=$!
-
-usleep 1000000
-
-for i in `seq 1 1000`; do
- echo "Trigger $i"
- pci --trigger
- usleep 100000
-done
-
-echo "Waiting grabber to finish"
-wait $pid
diff --git a/tests/heb/DataTaking.sh b/tests/heb/DataTaking.sh
deleted file mode 100755
index b6046d7..0000000
--- a/tests/heb/DataTaking.sh
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/bash
-
-#Channel 1 --> 05
-#Channel 2 --> 0B
-#Channel 1&2 --> 0F
-#Channel 3 --> 13
-#Channel 4 --> 23
-#Channel 3&4 --> 33
-#ALL --> 3F
-
-#rm *.out
-pci -r dma1 --multipacket -o /dev/null
-
-echo "Start DMA ..... "
-#pci --start-dma dma1
-sleep 0.2
-
-echo "Data Reset ... "
-pci -w 0x9040 000003f1
-sleep 0.1
-pci -w 0x9040 000003f0
-
-sleep 0.1
-#echo "Pilot bunch emulator ..... "
-#pci -w 0x9040 400003f0
-sleep 0.2
-pci -w 0x9040 03f0
-#pci -r 0x9000 -s 40
-#sleep 0.2
-echo "Start data pci. ..... "
-pci -w 0x9040 00bf0
-
-sleep 2
-
-echo "Stop data acquis...... "
-pci -w 0x9040 003f0
-pci -r 0x9000 -s 40
-sleep 0.1
-echo "Enable data transfer.... "
-pci -w 0x9040 007f0
-exit
-sleep 2
-pci -r dma1 -o run_num_$1.out --multipacket
-sleep 2
-
-pci -w 0x9040 003f0
-#echo "Status ... "
-
-
-
-pci -r 0x9000 -s 40
-
- status=`pci -r 0x9050 -s 1 | awk '{print $2$3$4}'`
- if [ "$status" != "85000021" ]; then
- echo "--------------------------------->>>> ERROR! ... "
- error=1
- exit
- else
- echo " Status 1 -> OK "
- fi
-
- status=`pci -r 0x9000 -s 1 | awk '{print $2$3$4}'`
- if [ "$status" != "01000021" ]; then
- echo "--------------------------------->>>> ERROR! ... "
- error=1
- exit
- else
- echo " Status 1 Readout -> OK "
- fi
-
-status=`pci -r 0x9008 -s 1 | awk '{print $2$3$4}'`
- if [ "$status" != "01000021" ]; then
- echo "--------------------------------->>>> ERROR! ... "
- error=1
- exit
- else
- echo " Status 2 Readout -> OK "
- fi
-
-status=`pci -r 0x9010 -s 1 | awk '{print $2$3$4}'`
- if [ "$status" != "01000021" ]; then
- echo "--------------------------------->>>> ERROR! ... "
- error=1
- exit
- else
- echo " Status 3 Readout -> OK "
- fi
-
-status=`pci -r 0x9018 -s 1 | awk '{print $2$3$4}'`
- if [ "$status" != "01000021" ]; then
- echo "--------------------------------->>>> ERROR! ... "
- error=1
- exit
- else
- echo " Status 4 Readout -> OK "
- fi
diff --git a/tests/heb/cfg/BoardOFF.sh b/tests/heb/cfg/BoardOFF.sh
deleted file mode 100755
index 351bcb8..0000000
--- a/tests/heb/cfg/BoardOFF.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-
-echo " ************************************************************** "
-echo " Board OFF"
-echo " ************************************************************** "
-
-pci -w 0x9040 0x01
-sleep 0.5
-
-pci --stop-dma dma1
diff --git a/tests/heb/cfg/BoardOn.sh b/tests/heb/cfg/BoardOn.sh
deleted file mode 100755
index b14c73b..0000000
--- a/tests/heb/cfg/BoardOn.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/bash
-
-echo " ************************************************************** "
-echo " Start DMA"
-echo " ************************************************************** "
-
-pci --start-dma dma1
-sleep 0.5
-pci --list-dma-engines
-
-
-echo " ************************************************************** "
-echo " Board ON procedure"
-echo " ************************************************************** "
-
-pci -w 0x9040 0x01
-sleep 1
-
-echo "switch ON the power supply --> FIRST <--"
-echo "Press a key to continue ...."
-read -n 1 -s
-
-echo "Switch ON T/Hs"
-pci -w 0x9040 0x3C1
-pci -r 0x9040 -s1
-
-echo "switch ON the power supply --> SECOND <--"
-echo "Press a key to continue ...."
-read -n 1 -s
-
-echo "Switch ON ADCs"
-pci -w 0x9040 0x3F1
-pci -r 0x9040 -s1
-sleep 0.1
-
-
-pci -w 0x9040 0x3F0
-pci -r 0x9040 -s1
-sleep 1
-
-echo " Status ................... "
-pci -r 0x9000 -s 40
-
-
-
-./PLL_conf_calib_3001.sh
-
-echo " Status ................... "
-pci -r 0x9000 -s 40
-
-
-echo " ************************************************************** "
-echo " Board Ready"
-echo " ************************************************************** "
-
-
-echo " --> remember to run: ./Set_Default.sh"
diff --git a/tests/heb/cfg/README b/tests/heb/cfg/README
deleted file mode 100644
index 125bc0d..0000000
--- a/tests/heb/cfg/README
+++ /dev/null
@@ -1,11 +0,0 @@
- - Initializing
- ./BoardOn.sh
- ./Set_Default.sh
-
- - Configuring the size
- pci -w 9020 0x20 (linear scale)
-
- * Number of samples are determined by 0x9020 / 0x9028 (0x0e by default)
- * For each sample is descibed by (184 / 2) * 128 bits
- * Where most-significant bytes of 4 dwords (128 bit) are iterating
- from 0x00 to 0xb8 with step 0x02
diff --git a/tests/heb/cfg/Set_ADC_1_Delay.sh b/tests/heb/cfg/Set_ADC_1_Delay.sh
deleted file mode 100755
index bd8f980..0000000
--- a/tests/heb/cfg/Set_ADC_1_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_4 clock ADC 1 delay... "
-
-upfix=000501
-fixed=4
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_2_Delay.sh b/tests/heb/cfg/Set_ADC_2_Delay.sh
deleted file mode 100755
index d6cdf75..0000000
--- a/tests/heb/cfg/Set_ADC_2_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_5 clock ADC 2 delay... "
-
-upfix=000501
-fixed=5
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_3_Delay.sh b/tests/heb/cfg/Set_ADC_3_Delay.sh
deleted file mode 100755
index 567b977..0000000
--- a/tests/heb/cfg/Set_ADC_3_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_6 clock ADC 3 delay... "
-
-upfix=000501
-fixed=6
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_ADC_4_Delay.sh b/tests/heb/cfg/Set_ADC_4_Delay.sh
deleted file mode 100755
index d666595..0000000
--- a/tests/heb/cfg/Set_ADC_4_Delay.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-echo "Set CH_7 clock ADC 4 delay... "
-
-upfix=000501
-fixed=7
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time value picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
-
diff --git a/tests/heb/cfg/Set_Default.sh b/tests/heb/cfg/Set_Default.sh
deleted file mode 100755
index 0149bf0..0000000
--- a/tests/heb/cfg/Set_Default.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-echo "Set Defaults delay value in the board... "
-
-./Set_FPGA_clock_delay.sh 0
-sleep 0.1
-
- ./Set_Delay_chip.sh 16 16 16 16
-sleep 0.1
-
-./Set_TH_Delay.sh 12
-sleep 0.1
-
-./Set_ADC_1_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_2_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_3_Delay.sh 5
-sleep 0.1
-
-./Set_ADC_4_Delay.sh 5
-
-#pci -w 0x9020 200b20
-pci -w 0x9020 20
-pci -w 0x9028 e
-
-echo " DONE ................ "
-
diff --git a/tests/heb/cfg/Set_Delay_chip.sh b/tests/heb/cfg/Set_Delay_chip.sh
deleted file mode 100755
index 3d15cad..0000000
--- a/tests/heb/cfg/Set_Delay_chip.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
- zero=0
- hex_val1=$(printf "%02x\n" $1)
- hex_val2=$(printf "%02x\n" $2)
- hex_val3=$(printf "%02x\n" $3)
- hex_val4=$(printf "%02x\n" $4)
-
- pci -w 0x9080 $zero$hex_val4$hex_val3$hex_val2$hex_val1
- pci -r 0x9080 -s 1
- sleep 0.5
diff --git a/tests/heb/cfg/Set_FPGA_clock_delay.sh b/tests/heb/cfg/Set_FPGA_clock_delay.sh
deleted file mode 100755
index f4d0f46..0000000
--- a/tests/heb/cfg/Set_FPGA_clock_delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set delay on T/Hs signals... "
-
-upfix=000501
-fixed=0
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/cfg/Set_TH_Delay.sh b/tests/heb/cfg/Set_TH_Delay.sh
deleted file mode 100755
index 9a6e58f..0000000
--- a/tests/heb/cfg/Set_TH_Delay.sh
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-echo "Set delay on T/Hs signals... "
-
-upfix=000501
-fixed=3
-
- hex_val=$(printf "%01x\n" $1)
- echo "Set $hex_val --> Time picosecond = `expr $1 "*" 150`."
- pci -w 0x9060 $upfix$hex_val$fixed
diff --git a/tests/heb/debug/debug.sh b/tests/heb/debug/debug.sh
deleted file mode 100755
index 2db21d4..0000000
--- a/tests/heb/debug/debug.sh
+++ /dev/null
@@ -1,45 +0,0 @@
-#! /bin/bash
-
-SCRIPT_PATH="`dirname \"$0\"`"
-SCRIPT_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-PCILIB_PATH=${SCRIPT_PATH%/tests/*}
-
-function pci {
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function strip_bad_values {
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/heb_strip_bad_values $*
-}
-
-function request_data {
- $PCILIB_PATH/tests/heb/debug/request_data.sh $*
-}
-
-while [ 1 ]; do
- from=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 6`
- to=`pci --list-dma-engines | grep C2S | sed -s 's/\s\+/ /g' | cut -d ' ' -f 8`
-
- if [ $from -gt $to ]; then
- buffers="`seq $from 255` `seq 0 $to`"
- else
- buffers=`seq $from $to`
- fi
-
- echo $buffers
-
- rm data.out
- for i in $buffers; do
- pci --read-dma-buffer dma1r:$i -o data.out
- done
-
-
- error=`strip_bad_values data.out | head -n 1 | cut -f 1 -d ':'`
- if [ $error != "0x1140" ]; then
- echo "Problems found"
- exit
- else
- echo "Fine"
- request_data
- fi
-done
diff --git a/tests/heb/debug/request_data.sh b/tests/heb/debug/request_data.sh
deleted file mode 100755
index b751f5d..0000000
--- a/tests/heb/debug/request_data.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-pci -r dma1 --multipacket -o /dev/null
-
-#echo "Data Reset ... "
-pci -w 0x9040 000003f1
-sleep 0.1
-pci -w 0x9040 000003f0
-
-sleep 0.1
-#echo "Pilot bunch emulator ..... "
-#pci -w 0x9040 400003f0
-sleep 0.2
-pci -w 0x9040 03f0
-#pci -r 0x9000 -s 40
-#sleep 0.2
-#echo "Start data pci. ..... "
-pci -w 0x9040 00bf0
-
-sleep 2
-
-#echo "Stop data acquis...... "
-pci -w 0x9040 003f0
-pci -r 0x9000 -s 40
-sleep 0.1
-#echo "Enable data transfer.... "
-pci -w 0x9040 007f0
diff --git a/tests/ipecamera/bench.sh b/tests/ipecamera/bench.sh
deleted file mode 100755
index 09edae9..0000000
--- a/tests/ipecamera/bench.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-size=16
-bytes=`expr $size "*" 4`
-
-rm -f bench.out
-pci --stop-dma dma1
-pci --reset
-
-#pci -w xrawdata_packet_length $bytes
-
-pci --start-dma dma1
-pci -w control 0x1e5
-sleep 1
-pci -w control 0x1e1
-
-sleep 1
-pci -w control 0x3e1
-for i in `seq 1 10`; do
-# pci -w control 0x1e1
- pci -w dma1 -s $size "*$i"
-# pci -w control 0x3e1
- usleep 100000
- pci -r dma1 -s $size -o bench.out
-done
-
-pci -w control 0x1e1
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
deleted file mode 100755
index f4afa06..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit.sh
+++ /dev/null
@@ -1,326 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error=1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- echo " $status "
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the reset and initialization"
-else
- echo " Camera READY ........................... OK"
-fi
-echo
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
deleted file mode 100755
index 5a4e582..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_10bit_4Mp.sh
+++ /dev/null
@@ -1,325 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 10 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 80000204
-sleep .1
-#echo " Release Reset for Readout"
-#pci -w 0x9040 800001e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 10 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 10 bit mode, set ADC resolution 10 bits "
-val=f000 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error=1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-#pci -w 0x9040 80000201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 2047
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-sleep 0.01
-###################################### NUMBER OF OUTPUT ############################################################
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c800
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error=1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#########################################################################################################
-sleep 0.01
-
-
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x71
-
-#echo " Reset Readout and CMOSIS "
-pci -w 0x9040 0x80000204
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 0x80000201
-sleep .1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the reset and initialization"
-else
- echo " Camera READY ........................... OK"
-fi
-echo
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
deleted file mode 100755
index 3c4af0e..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_11bit.sh
+++ /dev/null
@@ -1,318 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 11 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 11 bit mode, set ADC resolution 11 bits "
-val=f001 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error =1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa25
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab02
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-sleep 0.01
-#pci -w 0x9000 0xd011
-sleep 0.01
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-#pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.01
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "8449ffff0f0010013ffff111" ]; then
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- error =1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the resetand initialization"
-else
- echo " Camera READY ........ OK"
-fi
-echo
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
-
diff --git a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh b/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
deleted file mode 100755
index b04f2cd..0000000
--- a/tests/ipecamera/cfg/Reset_Init_all_reg_12bit.sh
+++ /dev/null
@@ -1,323 +0,0 @@
-#!/bin/bash
-
-###################### by Michele Caselle and Uros Stafanovic ##################################################
-############ Resent procedure and camera initialization for 12 -bit mode ######################################
-
-error=0
-echo " Reset Readout and CMOSIS "
-pci -w 0x9040 1e4
-sleep .1
-echo " Release Reset for Readout"
-pci -w 0x9040 1e0
-sleep .1
-##################### PLL SET #####################################
-val=f501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " Start CMOSIS Configuration .."
-pci -w 0x9000 f301
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "bf301" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d207
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# Michele 10 - 12 bit mode #
-# ###################################################################################################
-echo " 12 - bit mode, set Bit_mode "
-val=ef00 ######################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# Michele set ADC_resolution @ 12 bits
-echo " 12 bit mode, set ADC resolution 12 bits "
-val=f002 # qui for 10 - 11 - 12 bits ########################################################
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-# adc recommended 28=44
-val=e72c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val "
- error =1
- # exit
-fi
-sleep 0.01
-# ####################################################################################################
-
-################# CAMERA CONFIGURATION ############################################
-val=e603
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-
-val=d404
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=d501
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# recommended is d840
-val=d840
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-# sleep 0.01
-# recommended is db40
-val=db40
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-val=de65
-# val=de0
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-sleep 0.01
-val=df6a
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-echo " End CMOSIS Configuration .."
-########################################################################################################
-echo " Write exp time......"
-
-######################################### EXP TIME #######################################################
-val=aa0f
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=ab2c
-val=ab00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-# val=acaa
-val=ac00
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-####################################################################################################################
-
-sleep 0.01
-pci -w 0x9040 201
-sleep 0.01
-########################## WRITE THE READOUT NUMBER OF LINE #######################################################
-pci -w cmosis_number_lines 1088
-#pci -w number_lines 8
-sleep 0.01
-#################################################################################################################
-pci --start-dma dma1
-sleep 0.01
-#VRAMP 6c is 108
-val=e26c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-#VRAMP 6c is 108
-val=e36c
-pci -w 0x9000 $val
-sleep 0.01
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-sleep 0.01
-########################################################################################################
-#pci -w 0x9000 0xc802
-##pci -w 0x9000 0xc803
-sleep 0.01
-val=c802
-pci -w 0x9000 $val
-#pci -r 0x9000 -s 10
-sleep 0.01
-value=`pci -r 0x9000 -s 8 | grep 9010 | awk '{print $2}' | cut -c 4-8`
-if [ "$value" != "b$val" ]; then
- echo "--------------------------------->>>> ERROR! read value: ${value:1:4}, written value: $val"
- error =1
- # exit
-fi
-#pci -r 0x9000 -s 10
-
-sleep 0.01
-
-##################################################
-#SET the max number of frame in DDR
-pci -w 0x91a0 0x1C
-
-
-#pci -w 0x9000 0xd011
-sleep 0.01
-pci -r 0x9000 -s 10
-
-sleep 0.01
-#pci -w 0x9000 0xd111
-sleep 0.01
-pci -r 0x9000 -s 10
-#########################################################################################################
-sleep 0.1
-
-status=`pci -r 0x9050 -s 4 | awk '{print $2$3$4}'`
-if [ "$status" != "844950280f0010013ffff111" ]; then
-
- echo "--------------------------------->>>> ERROR! in the camera status ... "
- echo $status
- error=1
- # exit
-fi
-
-#echo "--> $status"
-
-if [ "$error" = "1" ]; then
- echo " Error in the resetand initialization"
-else
- echo " Camera READY ........ OK"
-fi
-echo
-
-
-
-echo "DMA reset ... "
-pci --stop-dma dma1
-sleep 0.5
-pci --start-dma dma1
diff --git a/tests/ipecamera/frame.sh b/tests/ipecamera/frame.sh
deleted file mode 100755
index 679817b..0000000
--- a/tests/ipecamera/frame.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout ... "
-pci -w control 3e1
-
-usleep 100000
-
-pci -r dma1 -o bench.out --multipacket
-
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/frame_req.sh b/tests/ipecamera/frame_req.sh
deleted file mode 100755
index bce89c3..0000000
--- a/tests/ipecamera/frame_req.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-#pci --stop-dma dma1
-#pci --reset
-
-echo "Set packet size 1024 .. "
-pci -w cmosis_number_lines 1088
-#pci -w xrawdata_packet_length 4096
-pci --start-dma dma1
-usleep 1000
-
-echo "Send frame request ... "
-pci -w control 1e9
-usleep 100000
-pci -w control 1e1
-usleep 100000
-
-echo "Enable Readout 3... "
-pci -w control 3e1
-usleep 1000000
-pci -w control 1e1
-
diff --git a/tests/ipecamera/grab-hwtrigger.sh b/tests/ipecamera/grab-hwtrigger.sh
deleted file mode 100755
index 0279ab4..0000000
--- a/tests/ipecamera/grab-hwtrigger.sh
+++ /dev/null
@@ -1,20 +0,0 @@
-#! /bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function enable_hw_trigger {
- usleep 100000
- pci -w control 0xa01
-}
-
-rm -f images.raw
-
-enable_hw_trigger &
-pid=$!
-
-echo "Starting the grabber"
-pci -g -o images.raw --run-time 60000000 --verbose 10 -o /dev/null
-wait $pid
diff --git a/tests/ipecamera/stimuli.sh b/tests/ipecamera/stimuli.sh
deleted file mode 100755
index 33e99e1..0000000
--- a/tests/ipecamera/stimuli.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/bash
-
-function pci {
- PCILIB_PATH="/root/pcitool"
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-rm -f bench.out
-
-echo "Set FFFF the frame space .."
-pci -w 0x9180 fff
-
-echo "Set the number of frames .."
-pci -w reg9170 55
-
-pci --start-dma dma1
-
-echo "Send frame request ... "
-pci -w control 1f1
-usleep 100000
-pci -w control 1e1
-
-
-echo "Enable Readout ... "
-pci -w control 3e1
-pci -r dma1 -o bench.out --multipacket
-pci -w control 1e1
-
-pci --stop-dma dma1
-
diff --git a/tests/ipecamera/tests/loopback-test.sh b/tests/ipecamera/tests/loopback-test.sh
deleted file mode 100755
index 1c033cc..0000000
--- a/tests/ipecamera/tests/loopback-test.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#! /bin/bash
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function compare {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/apps/compare_to_value $*
-}
-
-#size=`expr 1024 "*" 1024`
-size=`expr 1024 "*" 1`
-multiplier=2
-wait=0
-
-/root/pcitool/tests/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma dma1
-pci --start-dma dma1
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1024 -o /dev/null | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
- echo "There is data on dma..."
- exit
-fi
-
-failed=0
-send=0
-errors=0
-err_num=0
-
-print_iters=`expr 2 + 1024 '*' 100 / $size`
-
-read_size=`expr $multiplier '*' $size`
-echo "Starting..."
-i=1
-
-pci -w 0x9040 0x201
-
-while [ 1 ]; do
- if [ $wait -gt 0 ]; then
- pci -w 0x9040 0x1
- fi
-
- pci -w dma1 -s $size "*0x$i"
- rm -f /tmp/camera-test.out
- pci -r dma1 --wait --multipacket -s $read_size -o /tmp/camera-test.out -t 1000000 &> /dev/null
- if [ $wait -gt 0 ]; then
- wrdone=0
- while [ $wrdone -eq 0 ]; do
-# pci --list-dma-engines
- pci --list-dma-engines | grep "DMA1 S2C" | grep "SD" #&> /dev/null
- wrdone=$?
- done
- pci -w 0x9040 0x201
- fi
-
- res=`compare /tmp/camera-test.out $read_size "$i" 6 2 6`
- if [ $? -eq 0 ]; then
- err_cnt=`echo $res | cut -f 1 -d ' '`
- if [ "$err_cnt" -ne 0 ]; then
- pci -r dma1 --wait --multipacket -o /tmp/camera-test.out -t 1000000 &> /dev/null
- cp /tmp/camera-test.out /tmp/camera-test.out.$err_num
- err_num=$(($err_num + 1))
- fi
- byte_cnt=`echo $res | cut -f 3 -d ' '`
- send=$(($send + $byte_cnt * 4))
- errors=$(($errors + $err_cnt * 4))
- else
- failed=$(($failed + 1))
- fi
-
- i=$((i + 1))
- if [ $i -eq $print_iters ]; then
- echo "Data send: $send bytes, Errors: $errors bytes, Failed exchanges: $failed"
-# pci -r 0x9070 -s 4
- i=1
- fi
-done
diff --git a/tests/ipecamera/tests/run-and-decode-test.sh b/tests/ipecamera/tests/run-and-decode-test.sh
deleted file mode 100755
index d355475..0000000
--- a/tests/ipecamera/tests/run-and-decode-test.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-#! /bin/bash
-
-location=/mnt/fast/
-#location="./"
-duration=10000000
-wait_frame=1000000
-
-TESTS_PATH="`dirname \"$0\"`"
-TESTS_PATH="`( cd \"$TESTS_PATH\" && pwd )`"
-
-function pci {
- PCILIB_PATH=$TESTS_PATH/..
- LD_LIBRARY_PATH="$PCILIB_PATH" $PCILIB_PATH/pci $*
-}
-
-function stop {
- usleep $duration
- pci -w control 0x201 &> /dev/null
-}
-
-function reset {
- pci -r 0x9000 -s 256 > $1.status
- $TESTS_PATH/ipecamera/Reset_Init_all_reg_10bit.sh &> $1.reset
-}
-
-
-$TESTS_PATH/ipecamera/cfg/Reset_Init_all_reg_10bit.sh &> /dev/null
-$TESTS_PATH/ipecamera/frame.sh &> /dev/null
-rm -f bench.out
-
-pci --stop-dma
-pci --start-dma dma1
-
-
-pci -r dma1 -s 16777216 --multipacket -o /dev/null &> /dev/null
-
-pci -r dma1 -s 1 | grep -i "Error (62)" &> /dev/null
-if [ $? -ne 0 ]; then
- echo "There is data on dma..."
- exit
-fi
-
-echo "Starting ... "
-
-decode_failures=0
-failures=0
-failed=0
-frames=0
-fpga_failures=0
-cmosis_failures=0
-frame_rate_failures=0
-
-iter=0
-while [ 1 ]; do
- pci -w control 0xa01 &> /dev/null
- stop &
-
- output="$location/test$iter.out"
- rm -f $output
- pci -r dma1 -o $output --wait --multipacket -t $wait_frame &> /dev/null
-
- killall -9 usleep &> /dev/null
- usleep 100000
- pci -w control 0x201 &> /dev/null
-
- if [ -f $output ]; then
- result=`ipedec -d -v --continue $output 2>&1 | grep -iE "failed|decoded"`
- cur_failed=`echo $result | wc -l`
- cur_decoded=`echo $result | tail -n 1 | grep -i decoded`
- if [ $? -ne 0 -o $cur_failed -eq 0 ]; then
- ipedec -d -v --continue $output > $output.decode
- decode_failures=$(($decode_failures + 1))
- reset $output
- else
- cur_failed=$(($cur_failed - 1))
- cur_frames=`echo $cur_decoded | cut -f 2 -d ' '`
- failed=$(($failed + $cur_failed))
- frames=$(($frames + $cur_frames))
- fpga_status=`pci -r 0x9054 | awk '{print $2;}' | cut -c 2`
- cmosis_status=`pci -r 0x9050 | awk '{print $2;}' | cut -c 3-4`
- if [ "$fpga_status" != "f" ]; then
- fpga_failures=$(($fpga_failures + 1))
- reset $output
- elif [ "$cmosis_status" == "7d" ]; then
- cmosis_failures=$(($cmosis_failures + 1))
- reset $output
- elif [ $cur_frames -lt 10 ]; then
- frame_rate_failures=$(($frame_rate_failures + 1))
- reset $output
- elif [ $cur_failed -eq 0 ]; then
- rm -f $output
- else
- reset $output
- fi
- fi
- else
- failures=$(($failures + 1))
- reset $output
- fi
-
- echo "Frames: $frames, Failed Frames: $failed, Failed Exchanges: $failures, Failed Decodings: $decode_failures, FPGA Failures: $fpga_failures, CMOSIS Failures: $cmosis_failures, Low Frame Rate: $frame_rate_failures"
- iter=`expr $iter + 1`
-done
diff --git a/tests/new_device.sh b/tests/new_device.sh
deleted file mode 100755
index 3545321..0000000
--- a/tests/new_device.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-#! /bin/bash
-
-echo "10ee 6028" > /sys/bus/pci/drivers/pciDriver/new_id