diff options
Diffstat (limited to 'setup/projects/katrin/files/etc/apache2-kaas-centos')
19 files changed, 1265 insertions, 0 deletions
diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf new file mode 100644 index 0000000..a70324b --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf @@ -0,0 +1,217 @@ +# +# When we also provide SSL we have to listen to the +# the HTTPS port in addition. +# +Listen 0.0.0.0:8443 https + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog builtin + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +SSLSessionCache shmcb:/opt/rh/httpd24/root/var/run/httpd/sslcache(512000) +SSLSessionCacheTimeout 300 + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +SSLRandomSeed startup file:/dev/urandom 256 +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + +# +# Use "SSLCryptoDevice" to enable any supported hardware +# accelerators. Use "openssl engine -v" to list supported +# engine names. NOTE: If you enable an accelerator and the +# server does not start, consult the error logs and ensure +# your accelerator is functioning properly. +# +SSLCryptoDevice builtin +#SSLCryptoDevice ubsec + +## +## SSL Virtual Host Context +## + +<VirtualHost _default_:8443> + +# General setup for the virtual host, inherited from global configuration +#DocumentRoot "/var/www/html" +#ServerName www.example.com:8443 + +# Use separate log files for the SSL virtual host; note that LogLevel +# is not inherited from httpd.conf. +ErrorLog |/usr/bin/cat +TransferLog |/usr/bin/cat +LogLevel warn + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# SSL Protocol support: +# List the enable protocol levels with which clients will be able to +# connect. Disable SSLv2 access by default: +SSLProtocol all -SSLv2 + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 + +# Speed-optimized SSL Cipher configuration: +# If speed is your main concern (on busy HTTPS servers e.g.), +# you might want to force clients to specific, performance +# optimized ciphers. In this case, prepend those ciphers +# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. +# Caveat: by giving precedence to RC4-SHA and AES128-SHA +# (as in the example below), most connections will no longer +# have perfect forward secrecy - if the server's key is +# compromised, captures of past or future traffic must be +# considered compromised, too. +#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 +#SSLHonorCipherOrder on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. A new +# certificate can be generated using the genkey(1) command. +SSLCertificateFile /etc/pki/tls/certs/localhost.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +SSLCertificateKeyFile /etc/pki/tls/private/localhost.key + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convinience. +#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +#<Location /> +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +#</Location> + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire +<Files ~ "\.(cgi|shtml|phtml|php3?)$"> + SSLOptions +StdEnvVars +</Files> +<Directory "/var/www/cgi-bin"> + SSLOptions +StdEnvVars +</Directory> + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is send or allowed to received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is send and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog |/usr/bin/cat \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + +</VirtualHost> + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf new file mode 100644 index 0000000..b5d7a49 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf @@ -0,0 +1,36 @@ +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# +# The path to the end user account 'public_html' directory must be +# accessible to the webserver userid. This usually means that ~userid +# must have permissions of 711, ~userid/public_html must have permissions +# of 755, and documents contained therein must be world-readable. +# Otherwise, the client will only receive a "403 Forbidden" message. +# +<IfModule mod_userdir.c> + # + # UserDir is disabled by default since it can confirm the presence + # of a username on the system (depending on home directory + # permissions). + # + UserDir disabled + + # + # To enable requests to /~user/ to serve the user's public_html + # directory, remove the "UserDir disabled" line above, and uncomment + # the following line instead: + # + #UserDir public_html +</IfModule> + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# +<Directory "/home/*/public_html"> + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + Require method GET POST OPTIONS +</Directory> + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README new file mode 100644 index 0000000..f5e9661 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README @@ -0,0 +1,9 @@ + +This directory holds configuration files for the Apache HTTP Server; +any files in this directory which have the ".conf" extension will be +processed as httpd configuration files. The directory is used in +addition to the directory /etc/httpd/conf.modules.d/, which contains +configuration files necessary to load modules. + +Files are processed in alphabetical order. + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf new file mode 100644 index 0000000..55f658e --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf @@ -0,0 +1,94 @@ +# +# Directives controlling the display of server-generated directory listings. +# +# Required modules: mod_authz_core, mod_authz_host, +# mod_autoindex, mod_alias +# +# To see the listing of a directory, the Options directive for the +# directory must include "Indexes", and the directory must not contain +# a file matching those listed in the DirectoryIndex directive. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing HTMLTable VersionSort + +# We include the /icons/ alias for FancyIndexed directory listings. If +# you do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/opt/rh/httpd24/root/usr/share/httpd/icons/" + +<Directory "/opt/rh/httpd24/root/usr/share/httpd/icons"> + Options Indexes MultiViews FollowSymlinks + AllowOverride None + Require all granted +</Directory> + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif /core +AddIcon /icons/bomb.gif */core.* + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf new file mode 100644 index 0000000..325d196 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf @@ -0,0 +1,6 @@ +ProxyPass /adei http://katrin.kit.edu/adei +ProxyPassReverse /adei http://katrin.kit.edu/adei +ProxyPass /adei-katrin http://katrin.kit.edu/adei-katrin +ProxyPassReverse /adei-katrin http://katrin.kit.edu/adei-katrin +ProxyPass /katrin-ng http://katrin.kit.edu/katrin-ng +ProxyPassReverse /katrin-ng http://katrin.kit.edu/katrin-ng diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf new file mode 100644 index 0000000..34b4b72 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf @@ -0,0 +1,18 @@ +# +# This configuration file enables the default "Welcome" page if there +# is no default index page present for the root URL. To disable the +# Welcome page, comment out all the lines below. +# +# NOTE: if this file is removed, it will be restored on upgrades. +# +<LocationMatch "^/+$"> + Options -Indexes + ErrorDocument 403 /.noindex.html +</LocationMatch> + +<Directory /opt/rh/httpd24/root/usr/share/httpd/noindex> + AllowOverride None + Require all granted +</Directory> + +Alias /.noindex.html /opt/rh/httpd24/root/usr/share/httpd/noindex/index.html diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf new file mode 100644 index 0000000..2e3ce8c --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf @@ -0,0 +1,67 @@ +# +# This file loads most of the modules included with the Apache HTTP +# Server itself. +# + +LoadModule access_compat_module modules/mod_access_compat.so +LoadModule actions_module modules/mod_actions.so +LoadModule alias_module modules/mod_alias.so +LoadModule allowmethods_module modules/mod_allowmethods.so +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_core_module modules/mod_authn_core.so +LoadModule authn_dbd_module modules/mod_authn_dbd.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_socache_module modules/mod_authn_socache.so +LoadModule authz_core_module modules/mod_authz_core.so +LoadModule authz_dbd_module modules/mod_authz_dbd.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule cache_module modules/mod_cache.so +LoadModule cache_disk_module modules/mod_cache_disk.so +LoadModule cache_socache_module modules/mod_cache_socache.so +LoadModule data_module modules/mod_data.so +LoadModule dbd_module modules/mod_dbd.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule dir_module modules/mod_dir.so +LoadModule dumpio_module modules/mod_dumpio.so +LoadModule echo_module modules/mod_echo.so +LoadModule env_module modules/mod_env.so +LoadModule expires_module modules/mod_expires.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule filter_module modules/mod_filter.so +LoadModule headers_module modules/mod_headers.so +#LoadModule http2_module modules/mod_http2.so +LoadModule include_module modules/mod_include.so +LoadModule info_module modules/mod_info.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule logio_module modules/mod_logio.so +LoadModule macro_module modules/mod_macro.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule mime_module modules/mod_mime.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule remoteip_module modules/mod_remoteip.so +LoadModule reqtimeout_module modules/mod_reqtimeout.so +LoadModule request_module modules/mod_request.so +LoadModule rewrite_module modules/mod_rewrite.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule slotmem_plain_module modules/mod_slotmem_plain.so +LoadModule slotmem_shm_module modules/mod_slotmem_shm.so +LoadModule socache_dbm_module modules/mod_socache_dbm.so +LoadModule socache_memcache_module modules/mod_socache_memcache.so +LoadModule socache_shmcb_module modules/mod_socache_shmcb.so +LoadModule status_module modules/mod_status.so +LoadModule substitute_module modules/mod_substitute.so +LoadModule suexec_module modules/mod_suexec.so +LoadModule unique_id_module modules/mod_unique_id.so +LoadModule unixd_module modules/mod_unixd.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule version_module modules/mod_version.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf new file mode 100644 index 0000000..7bfd1d4 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf @@ -0,0 +1,19 @@ +# Select the MPM module which should be used by uncommenting exactly +# one of the following LoadModule lines: + +# prefork MPM: Implements a non-threaded, pre-forking web server +# See: http://httpd.apache.org/docs/2.4/mod/prefork.html +LoadModule mpm_prefork_module modules/mod_mpm_prefork.so + +# worker MPM: Multi-Processing Module implementing a hybrid +# multi-threaded multi-process web server +# See: http://httpd.apache.org/docs/2.4/mod/worker.html +# +#LoadModule mpm_worker_module modules/mod_mpm_worker.so + +# event MPM: A variant of the worker MPM with the goal of consuming +# threads only for connections with active processing +# See: http://httpd.apache.org/docs/2.4/mod/event.html +# +#LoadModule mpm_event_module modules/mod_mpm_event.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf new file mode 100644 index 0000000..b8003f4 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf @@ -0,0 +1,4 @@ +# This file configures all the proxy modules: +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_http_module modules/mod_proxy_http.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf new file mode 100644 index 0000000..e6af8de --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf @@ -0,0 +1,3 @@ +LoadModule dav_module modules/mod_dav.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule dav_lock_module modules/mod_dav_lock.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf new file mode 100644 index 0000000..9e0d0db --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf @@ -0,0 +1 @@ +LoadModule lua_module modules/mod_lua.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf new file mode 100644 index 0000000..70bda5e --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf @@ -0,0 +1,20 @@ +# +# This file lists modules included with the Apache HTTP Server +# which are not enabled by default. +# + +#LoadModule asis_module modules/mod_asis.so +#LoadModule buffer_module modules/mod_buffer.so +#LoadModule file_cache_module modules/mod_file_cache.so +#LoadModule watchdog_module modules/mod_watchdog.so +#LoadModule heartbeat_module modules/mod_heartbeat.so +#LoadModule heartmonitor_module modules/mod_heartmonitor.so +#LoadModule usertrack_module modules/mod_usertrack.so +#LoadModule dialup_module modules/mod_dialup.so +#LoadModule charset_lite_module modules/mod_charset_lite.so +#LoadModule log_debug_module modules/mod_log_debug.so +#LoadModule log_forensic_module modules/mod_log_forensic.so +#LoadModule ratelimit_module modules/mod_ratelimit.so +#LoadModule reflector_module modules/mod_reflector.so +#LoadModule sed_module modules/mod_sed.so +#LoadModule speling_module modules/mod_speling.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf new file mode 100644 index 0000000..cc0bca0 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf @@ -0,0 +1,16 @@ +# This file configures all the proxy modules: +LoadModule proxy_module modules/mod_proxy.so +LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so +LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so +LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so +LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so +LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule proxy_express_module modules/mod_proxy_express.so +LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so +LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_scgi_module modules/mod_proxy_scgi.so +LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf new file mode 100644 index 0000000..53235cd --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf @@ -0,0 +1 @@ +LoadModule ssl_module modules/mod_ssl.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf new file mode 100644 index 0000000..b208c97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf @@ -0,0 +1,2 @@ +# This file configures systemd module: +LoadModule systemd_module modules/mod_systemd.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf new file mode 100644 index 0000000..5b8b936 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf @@ -0,0 +1,14 @@ +# This configuration file loads a CGI module appropriate to the MPM +# which has been configured in 00-mpm.conf. mod_cgid should be used +# with a threaded MPM; mod_cgi with the prefork MPM. + +<IfModule mpm_worker_module> + LoadModule cgid_module modules/mod_cgid.so +</IfModule> +<IfModule mpm_event_module> + LoadModule cgid_module modules/mod_cgid.so +</IfModule> +<IfModule mpm_prefork_module> + LoadModule cgi_module modules/mod_cgi.so +</IfModule> + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf new file mode 100644 index 0000000..88fcb97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf @@ -0,0 +1,353 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. +# In particular, see +# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to specify a local disk on the +# Mutex directive, if file-based mutexes are used. If you wish to share the +# same ServerRoot for multiple httpd daemons, you will need to change at +# least PidFile. +# +ServerRoot "/opt/rh/httpd24/root/etc/httpd" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the <VirtualHost> +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 0.0.0.0:8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +Include conf.modules.d/*.conf + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User default +Group root + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# <VirtualHost> definition. These values also provide defaults for +# any <VirtualHost> containers you may define later in the file. +# +# All of these directives may appear inside <VirtualHost> containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin root@localhost + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# Deny access to the entirety of your server's filesystem. You must +# explicitly permit access to web content directories in other +# <Directory> blocks below. +# +<Directory /> + AllowOverride none + Require all denied +</Directory> + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/opt/rh/httpd24/root/var/www/html" + +# +# Relax access to content within /opt/rh/httpd24/root/var/www. +# +<Directory "/opt/rh/httpd24/root/var/www"> + AllowOverride None + # Allow open access: + Require all granted +</Directory> + +# Further relax access to the default document root: +<Directory "/opt/rh/httpd24/root/var/www/html"> + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.4/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride All + + # + # Controls who can get stuff from this server. + # + Require all granted +</Directory> + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# +<IfModule dir_module> + DirectoryIndex index.html +</IfModule> + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# +<Files ".ht*"> + Require all denied +</Files> + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a <VirtualHost> +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a <VirtualHost> +# container, that host's errors will be logged there and not here. +# +ErrorLog |/usr/bin/cat + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + +<IfModule log_config_module> + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + <IfModule logio_module> + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + </IfModule> + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a <VirtualHost> + # container, they will be logged here. Contrariwise, if you *do* + # define per-<VirtualHost> access logfiles, transactions will be + # logged therein and *not* in this file. + # + #CustomLog "logs/access_log" common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + CustomLog |/usr/bin/cat combined +</IfModule> + +<IfModule alias_module> + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a <Directory> section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/opt/rh/httpd24/root/var/www/cgi-bin/" + +</IfModule> + +# +# "/opt/rh/httpd24/root/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# +<Directory "/opt/rh/httpd24/root/var/www/cgi-bin"> + AllowOverride None + Options None + Require all granted +</Directory> + +<IfModule mime_module> + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig /etc/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + AddType text/html .shtml + AddOutputFilter INCLUDES .shtml +</IfModule> + +# +# Specify a default charset for all content served; this enables +# interpretation of all content as UTF-8 by default. To use the +# default browser choice (ISO-8859-1), or to allow the META tags +# in HTML content to override this choice, comment out this +# directive: +# +AddDefaultCharset UTF-8 + +<IfModule mime_magic_module> + # + # The mod_mime_magic module allows the server to use various hints from the + # contents of the file itself to determine its type. The MIMEMagicFile + # directive tells the module where the hint definitions are located. + # + MIMEMagicFile conf/magic +</IfModule> + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall may be used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# Defaults if commented: EnableMMAP On, EnableSendfile Off +# +#EnableMMAP off +EnableSendfile on + +# Supplemental configuration +# +# Load config files in the "/etc/httpd/conf.d" directory, if any. +IncludeOptional conf.d/*.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic new file mode 100644 index 0000000..7c56119 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic @@ -0,0 +1,385 @@ +# Magic data for mod_mime_magic Apache module (originally for file(1) command) +# The module is described in /manual/mod/mod_mime_magic.html +# +# The format is 4-5 columns: +# Column #1: byte number to begin checking from, ">" indicates continuation +# Column #2: type of data to match +# Column #3: contents of data to match +# Column #4: MIME type of result +# Column #5: MIME encoding of result (optional) + +#------------------------------------------------------------------------------ +# Localstuff: file(1) magic for locally observed files +# Add any locally observed files here. + +#------------------------------------------------------------------------------ +# end local stuff +#------------------------------------------------------------------------------ + +#------------------------------------------------------------------------------ +# Java + +0 short 0xcafe +>2 short 0xbabe application/java + +#------------------------------------------------------------------------------ +# audio: file(1) magic for sound formats +# +# from Jan Nicolai Langfeldt <janl@ifi.uio.no>, +# + +# Sun/NeXT audio data +0 string .snd +>12 belong 1 audio/basic +>12 belong 2 audio/basic +>12 belong 3 audio/basic +>12 belong 4 audio/basic +>12 belong 5 audio/basic +>12 belong 6 audio/basic +>12 belong 7 audio/basic + +>12 belong 23 audio/x-adpcm + +# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format +# that uses little-endian encoding and has a different magic number +# (0x0064732E in little-endian encoding). +0 lelong 0x0064732E +>12 lelong 1 audio/x-dec-basic +>12 lelong 2 audio/x-dec-basic +>12 lelong 3 audio/x-dec-basic +>12 lelong 4 audio/x-dec-basic +>12 lelong 5 audio/x-dec-basic +>12 lelong 6 audio/x-dec-basic +>12 lelong 7 audio/x-dec-basic +# compressed (G.721 ADPCM) +>12 lelong 23 audio/x-dec-adpcm + +# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM" +# AIFF audio data +8 string AIFF audio/x-aiff +# AIFF-C audio data +8 string AIFC audio/x-aiff +# IFF/8SVX audio data +8 string 8SVX audio/x-aiff + +# Creative Labs AUDIO stuff +# Standard MIDI data +0 string MThd audio/unknown +#>9 byte >0 (format %d) +#>11 byte >1 using %d channels +# Creative Music (CMF) data +0 string CTMF audio/unknown +# SoundBlaster instrument data +0 string SBI audio/unknown +# Creative Labs voice data +0 string Creative\ Voice\ File audio/unknown +## is this next line right? it came this way... +#>19 byte 0x1A +#>23 byte >0 - version %d +#>22 byte >0 \b.%d + +# [GRR 950115: is this also Creative Labs? Guessing that first line +# should be string instead of unknown-endian long...] +#0 long 0x4e54524b MultiTrack sound data +#0 string NTRK MultiTrack sound data +#>4 long x - version %ld + +# Microsoft WAVE format (*.wav) +# [GRR 950115: probably all of the shorts and longs should be leshort/lelong] +# Microsoft RIFF +0 string RIFF audio/unknown +# - WAVE format +>8 string WAVE audio/x-wav +# MPEG audio. +0 beshort&0xfff0 0xfff0 audio/mpeg +# C64 SID Music files, from Linus Walleij <triad@df.lth.se> +0 string PSID audio/prs.sid + +#------------------------------------------------------------------------------ +# c-lang: file(1) magic for C programs or various scripts +# + +# XPM icons (Greg Roelofs, newt@uchicago.edu) +# ideally should go into "images", but entries below would tag XPM as C source +0 string /*\ XPM image/x-xbm 7bit + +# this first will upset you if you're a PL/1 shop... (are there any left?) +# in which case rm it; ascmagic will catch real C programs +# C or REXX program text +0 string /* text/plain +# C++ program text +0 string // text/plain + +#------------------------------------------------------------------------------ +# compress: file(1) magic for pure-compression formats (no archives) +# +# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc. +# +# Formats for various forms of compressed data +# Formats for "compress" proper have been moved into "compress.c", +# because it tries to uncompress it to figure out what's inside. + +# standard unix compress +0 string \037\235 application/octet-stream x-compress + +# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver) +0 string \037\213 application/octet-stream x-gzip + +# According to gzip.h, this is the correct byte order for packed data. +0 string \037\036 application/octet-stream +# +# This magic number is byte-order-independent. +# +0 short 017437 application/octet-stream + +# XXX - why *two* entries for "compacted data", one of which is +# byte-order independent, and one of which is byte-order dependent? +# +# compacted data +0 short 0x1fff application/octet-stream +0 string \377\037 application/octet-stream +# huf output +0 short 0145405 application/octet-stream + +# Squeeze and Crunch... +# These numbers were gleaned from the Unix versions of the programs to +# handle these formats. Note that I can only uncrunch, not crunch, and +# I didn't have a crunched file handy, so the crunch number is untested. +# Keith Waclena <keith@cerberus.uchicago.edu> +#0 leshort 0x76FF squeezed data (CP/M, DOS) +#0 leshort 0x76FE crunched data (CP/M, DOS) + +# Freeze +#0 string \037\237 Frozen file 2.1 +#0 string \037\236 Frozen file 1.0 (or gzip 0.5) + +# lzh? +#0 string \037\240 LZH compressed data + +#------------------------------------------------------------------------------ +# frame: file(1) magic for FrameMaker files +# +# This stuff came on a FrameMaker demo tape, most of which is +# copyright, but this file is "published" as witness the following: +# +0 string \<MakerFile application/x-frame +0 string \<MIFFile application/x-frame +0 string \<MakerDictionary application/x-frame +0 string \<MakerScreenFon application/x-frame +0 string \<MML application/x-frame +0 string \<Book application/x-frame +0 string \<Maker application/x-frame + +#------------------------------------------------------------------------------ +# html: file(1) magic for HTML (HyperText Markup Language) docs +# +# from Daniel Quinlan <quinlan@yggdrasil.com> +# and Anna Shergold <anna@inext.co.uk> +# +0 string \<!DOCTYPE\ HTML text/html +0 string \<!doctype\ html text/html +0 string \<HEAD text/html +0 string \<head text/html +0 string \<TITLE text/html +0 string \<title text/html +0 string \<html text/html +0 string \<HTML text/html +0 string \<!-- text/html +0 string \<h1 text/html +0 string \<H1 text/html + +# XML eXtensible Markup Language, from Linus Walleij <triad@df.lth.se> +0 string \<?xml text/xml + +#------------------------------------------------------------------------------ +# images: file(1) magic for image formats (see also "c-lang" for XPM bitmaps) +# +# originally from jef@helios.ee.lbl.gov (Jef Poskanzer), +# additions by janl@ifi.uio.no as well as others. Jan also suggested +# merging several one- and two-line files into here. +# +# XXX - byte order for GIF and TIFF fields? +# [GRR: TIFF allows both byte orders; GIF is probably little-endian] +# + +# [GRR: what the hell is this doing in here?] +#0 string xbtoa btoa'd file + +# PBMPLUS +# PBM file +0 string P1 image/x-portable-bitmap 7bit +# PGM file +0 string P2 image/x-portable-greymap 7bit +# PPM file +0 string P3 image/x-portable-pixmap 7bit +# PBM "rawbits" file +0 string P4 image/x-portable-bitmap +# PGM "rawbits" file +0 string P5 image/x-portable-greymap +# PPM "rawbits" file +0 string P6 image/x-portable-pixmap + +# NIFF (Navy Interchange File Format, a modification of TIFF) +# [GRR: this *must* go before TIFF] +0 string IIN1 image/x-niff + +# TIFF and friends +# TIFF file, big-endian +0 string MM image/tiff +# TIFF file, little-endian +0 string II image/tiff + +# possible GIF replacements; none yet released! +# (Greg Roelofs, newt@uchicago.edu) +# +# GRR 950115: this was mine ("Zip GIF"): +# ZIF image (GIF+deflate alpha) +0 string GIF94z image/unknown +# +# GRR 950115: this is Jeremy Wohl's Free Graphics Format (better): +# FGF image (GIF+deflate beta) +0 string FGF95a image/unknown +# +# GRR 950115: this is Thomas Boutell's Portable Bitmap Format proposal +# (best; not yet implemented): +# PBF image (deflate compression) +0 string PBF image/unknown + +# GIF +0 string GIF image/gif + +# JPEG images +0 beshort 0xffd8 image/jpeg + +# PC bitmaps (OS/2, Windoze BMP files) (Greg Roelofs, newt@uchicago.edu) +0 string BM image/bmp +#>14 byte 12 (OS/2 1.x format) +#>14 byte 64 (OS/2 2.x format) +#>14 byte 40 (Windows 3.x format) +#0 string IC icon +#0 string PI pointer +#0 string CI color icon +#0 string CP color pointer +#0 string BA bitmap array + +0 string \x89PNG image/png +0 string FWS application/x-shockwave-flash +0 string CWS application/x-shockwave-flash + +#------------------------------------------------------------------------------ +# lisp: file(1) magic for lisp programs +# +# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com) +0 string ;; text/plain 8bit +# Emacs 18 - this is always correct, but not very magical. +0 string \012( application/x-elc +# Emacs 19 +0 string ;ELC\023\000\000\000 application/x-elc + +#------------------------------------------------------------------------------ +# mail.news: file(1) magic for mail and news +# +# There are tests to ascmagic.c to cope with mail and news. +0 string Relay-Version: message/rfc822 7bit +0 string #!\ rnews message/rfc822 7bit +0 string N#!\ rnews message/rfc822 7bit +0 string Forward\ to message/rfc822 7bit +0 string Pipe\ to message/rfc822 7bit +0 string Return-Path: message/rfc822 7bit +0 string Path: message/news 8bit +0 string Xref: message/news 8bit +0 string From: message/rfc822 7bit +0 string Article message/news 8bit +#------------------------------------------------------------------------------ +# msword: file(1) magic for MS Word files +# +# Contributor claims: +# Reversed-engineered MS Word magic numbers +# + +0 string \376\067\0\043 application/msword +0 string \333\245-\0\0\0 application/msword + +# disable this one because it applies also to other +# Office/OLE documents for which msword is not correct. See PR#2608. +#0 string \320\317\021\340\241\261 application/msword + + + +#------------------------------------------------------------------------------ +# printer: file(1) magic for printer-formatted files +# + +# PostScript +0 string %! application/postscript +0 string \004%! application/postscript + +# Acrobat +# (due to clamen@cs.cmu.edu) +0 string %PDF- application/pdf + +#------------------------------------------------------------------------------ +# sc: file(1) magic for "sc" spreadsheet +# +38 string Spreadsheet application/x-sc + +#------------------------------------------------------------------------------ +# tex: file(1) magic for TeX files +# +# XXX - needs byte-endian stuff (big-endian and little-endian DVI?) +# +# From <conklin@talisman.kaleida.com> + +# Although we may know the offset of certain text fields in TeX DVI +# and font files, we can't use them reliably because they are not +# zero terminated. [but we do anyway, christos] +0 string \367\002 application/x-dvi +#0 string \367\203 TeX generic font data +#0 string \367\131 TeX packed font data +#0 string \367\312 TeX virtual font data +#0 string This\ is\ TeX, TeX transcript text +#0 string This\ is\ METAFONT, METAFONT transcript text + +# There is no way to detect TeX Font Metric (*.tfm) files without +# breaking them apart and reading the data. The following patterns +# match most *.tfm files generated by METAFONT or afm2tfm. +#2 string \000\021 TeX font metric data +#2 string \000\022 TeX font metric data +#>34 string >\0 (%s) + +# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com) +#0 string \\input\ texinfo Texinfo source text +#0 string This\ is\ Info\ file GNU Info text + +# correct TeX magic for Linux (and maybe more) +# from Peter Tobias (tobias@server.et-inf.fho-emden.de) +# +0 leshort 0x02f7 application/x-dvi + +# RTF - Rich Text Format +0 string {\\rtf application/rtf + +#------------------------------------------------------------------------------ +# animation: file(1) magic for animation/movie formats +# +# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8) +# MPEG file +0 string \000\000\001\263 video/mpeg +# +# The contributor claims: +# I couldn't find a real magic number for these, however, this +# -appears- to work. Note that it might catch other files, too, +# so BE CAREFUL! +# +# Note that title and author appear in the two 20-byte chunks +# at decimal offsets 2 and 22, respectively, but they are XOR'ed with +# 255 (hex FF)! DL format SUCKS BIG ROCKS. +# +# DL file version 1 , medium format (160x100, 4 images/screen) +0 byte 1 video/unknown +0 byte 2 video/unknown +# Quicktime video, from Linus Walleij <triad@df.lth.se> +# from Apple quicktime file format documentation. +4 string moov video/quicktime +4 string mdat video/quicktime + |